Router User Manual

Nortel Secure Router 8000 Series
Configuration Guide - Basic Configuration 10
Router maintenance
Issue 5.3 (30 March 2009) Nortel Networks Inc.
10.4 Monitoring the router status
For daily maintenance of the router, you can use the display commands to view the status of
the router. This section describes the following topics:
z
Displaying the basic device information
z
Displaying the system version information
z
Displaying RPU restart information
10.4.1 Displaying the basic device information
Secure Routers 8002, 8004, and 8008 do not support the abnormal parameter.
Run:
display device [ slot-id | abnormal ]
This command displays the basic device information.
You can use this command to check the current boards in service and determine which board
is faulty.
10.4.2 Displaying the system version information
Run:
display version [ slot-id ]
This command displays version information for the system or the board in the specified slot.
Using the preceding command, you can check the system file version and the parameters of
each board. For example:
<Nortel> display version
Nortel Versatile Routing Platform Software
Secure Router 8000 Series (R) Software, Version 5.30(SR8012 V200R005C03B200)
Copyright (c) 2000-2008 Nortel Networks Inc.
Nortel SecureRouter 8012 Router uptime is 0day, 0hour, 30minutes
Startup time : 2007/03/28 13:48
Master Rpu (9)'s version information:
System start up mode is warm
Uptime is 0day, 0hour, 30minutes
Startup time : 2007/03/28 13:48
Nortel Versatile Routing Platform Software
1024M bytes SDRAM
64M bytes FLASH
512K bytes NVRAM
Pcb Version : VER.B
Bridge Version : VER.A
RPE Logic Version : 017
SBG Logic Version : 034
HAC Logic Version : 015
Small BootROM Version : 1.54
Big BootROM Version : 5.04
10-7