Network Router User Manual

3 BGP/MPLS IP VPN troubleshooting
Nortel Secure Router 8000 Series
Troubleshooting - VPN
3-26 Nortel Networks Inc. Issue 5.3 (30 March2009)
Item Description
Alarm message BGP ILM Creation Failed
Meaning No more LSPs can be created.
Possible cause The number of created LSPs reaches the maximum limit defined in the paf
file.
Solution Increase the number of allowed LSPs defined in the paf file.
3.5.4 Logs
Item Description
Log message BGP_L3VPN: Allocate token failed
Meaning Applying for tokens from LSPM fails.
Possible cause The number of tokens reaches the limit of the license.
Solution Purchase a new license.
Item Description
Log message BGP_L3VPN (Id = xx) : VPN has no ERT, withdraw default-route to peer
x.x.x.x
Meaning Service provider PE withdraws the sent routes.
Possible cause ERT is not configured for the VPN.
Solution Configure ERT.
Item Description
Log message BGP_L3VPN(Id = xx): RM cross route x.x.x.x failed.RMErrorNum = xx
Meaning Creating cross routes in the routing table fails.
Possible cause Cross routes fail in the RM policy filtering, or RM is abnormal.
Solution Check the RM policy or contact a Nortel engineer for technical assistance.
Item Description
Log message BGP: Maximum IPv4 Routes License Value xxx is Exceeded
Meaning The number of BGP routes reaches the threshold.