Network Router User Manual

Nortel Secure Router 8000 Series
Troubleshooting - VPN 4
MPLS L2VPN troubleshooting
Issue 5.3 (30 March 2009) Nortel Networks Inc. 4-23
*Client Interface : Atm2/1/0.100
Session State : down
AC Status : up
VC State : down
VC ID : 100
VC Type : atm aal5 sdu
Destination : 2.2.2.2
Local VC Label : 119811
Remote VC Label : 0
Control Word : Disable
Local VC MTU : 1500
Remote VC MTU : 0
Tunnel Policy Name : --
Traffic Behavior Name: --
PW Template Name : pwt1
Create time : 0 days, 0 hours, 0 minutes, 6 seconds
UP time : 0 days, 0 hours, 0 minutes, 0 seconds
Last change time : 0 days, 0 hours, 0 minutes, 6 seconds
# Specify a new peer address for the PW in the PW template:
[PE-Atm2/1/0.100] pw-template pwt1
[PE-pw-template-pwt1] peer-address 3.3.3.3
Info: The attribute of this PW template has been modified, please use PW restart command
to update PW's attribute
According to the prompt, do as follows:
[PE-pw-template-pwt1] return
# Reset the PW:
<PE> reset pw 100 atm-aal5-sdu
# Display the configuration and find that the peer IP address of the PW is unchanged:
<PE> display mpls l2vc 100
Total ldp vc : 1 0 up 1 down
*Client Interface : Atm2/1/0.100
Session State : down
AC Status : up
VC State : down
VC ID : 1
VC Type : atm aal5 sdu
Destination : 2.2.2.2
Local VC Label : 119811
Remote VC Label : 0
Control Word : Disable
Local VC MTU : 1500
Remote VC MTU : 0
Tunnel Policy Name : --
Traffic Behavior Name: --
PW Template Name : pwt1
Create time : 0 days, 0 hours, 0 minutes, 45 seconds
UP time : 0 days, 0 hours, 0 minutes, 0 seconds
Last change time : 0 days, 0 hours, 0 minutes, 45 seconds