Operation Manual

121212
Water
“Multibox” storage box can make ice cubes and store them.
Tomakeicecubes,llthelidofthe“Multibox”storageboxwithwaterandplaceitinthefreezedrawerofthefreezer.
When ice cubes are ready, take out the box from the freezer drawer. Remove the lid from the box, and push each cavity of
the lid from the back side. The ice cubes will pop out from the lid. Then, put the box back into its place.
Removing and attaching shelves
Fridge
11
2
2
1
1
2
2
Glass shelves
To remove a shelf from the
refrigerator, pull it out to the
point when it is stopped by
the guide. Then, lift it slightly
at the front part and pull it all
the way out.
Chiller Case and “Fresh
Case” Crisper
Pull out the case as far as it will
go. Then, lift the front part and
pull it out completely.
Door shelves and bottle
shelf
To remove a shelf from the
appliance, lift it as far as it
will go and pull it out.
Freezer
The drawers are protected against pulling out. To remove a drawer from the appliance,
open it, then lift the front part and pull it out.
Having removed the drawer, you can store food in the empty compartment.
Making ice cubes
• The bin at the bottom of the refrigerator is intended for storing fruit
and vegetables. It keeps humidity and prevents the food from drying
out.
• Store the food in suitable packaging to prevent them from emitting or
taking on odors.
The bin has integrated humidity regulator which allows setting the
humidity according to the amount of food stored.
Smaller amounts of food - push the control slider to the right.
Larger amounts of food - push the control slider to the left.
Humidity control of “Fresh Case” Crisper