Operating instructions

121212
Maintenance check
● Is the mains lead damaged?
● Does the mains plug get hot?
● Is the mains plug fi rmly in the mains socket?
If the mains lead is damaged, please consult an authorized service centre. DO NOT attempt to replace these items
yourself.
Extended disuse
If you’re not going to use the refrigerator for a long time, unplug it and clean the mains plug as described above. Then
leave the doors open for 2-3 days. This lets the interior dry out properly, and prevents odour and the build up of mould.
Do not switch the refrigerator on and off repeatedly. It will last longer if you leave it switched on during normal use.
Before moving or transporting your refrigerator
① Remove all items.
② Unplug it.
③ Pull, or ‘walk’ the refrigerator towards you.
④ Use a cloth, for example, to absorb the water in the evaporation pan.
(Lower back of the refrigerator)
Moving and transporting your refrigerator
At least two people are needed to carry the refrigerator safely.
① Hold the legs at one end, and corners at the other, as shown.
Note:
• Do not carry the refrigerator by holding its doors.
Always transport the refrigerator in its normal upright position.
Secure the doors with
adhesive tape
Care and cleaning instructions (continued)
Fridge
• A gutter and opening for water from melted ice to fl ow through are located
underneath the interior cooling panel.
The gutter and opening must not become clogged. Inspect often and clean
if necessary (e.g. with a plastic straw).
Freezer
• Frost or ice build-up, 3-5 mm thick, will increase power consumption.
Therefore, it should be regularly removed. Do not use any sharp objects,
solvents, or sprays.