Video Cassette Recorder Operating Instructions Model: NV-FJ614 N2QAKB000007 N2QAKB000001 NV-FJ614 Series (Hi-Fi) NV-FJ613 Series (Hi-Fi) NV-SJ216 Series (Mono) Model: NV-FJ613 NV-SJ216 Standard Accessories: 1 remote control 1 RF coaxial cable 1 mains lead 2 batteries, type R6 Contents Page Warning and Important Information Safety Information 2 Connecting and Setting up 3 Controls and Components Playback 4 TV Operation VCR Operation Menu Operation 5 Recording Timer Recording 6 Other VCR Fu
Warning and Important Information Please observe copyright laws when recording sound tracks and film. For your own safety and to protect the VCR: Do not remove outer cover, to prevent electric shock. There are no serviceable parts inside. Refer all servicing to qualified service personnel. Only transport and set up the VCR in a horizontal position. Only connect cables when all the parts of the VCR are switched off. Only clean the outside of the VCR, using a soft cloth and no cleaning fluid.
Connecting and Setting up Set up the connections shown here, and connect the mains lead (supplied) to your AC mains. If you want to connect the TV only with a RF Coaxial Cable (supplied), you must ensure that the video output channel is adjusted to the input channel of the TV. Aerial (not supplied) VCR RF in AV VCR TV For this purpose, please also read the operating instructions for your TV.
Controls and Components VCR display The functions of these buttons can be operated by the remote control or directly on the VCR. In this description, the remote control symbols are used in most cases. AC IN AV1 (TV) RF IN Playback VCR display RF OUT Playback (indicated by = ) Fast Forward and Forward Search (Cue) Fast Rewind and Backward Search (Review) To select Fast Forward or Fast Rewind, press these buttons when the video has stopped.
TV Operation This part of the remote control is used to operate some Panasonic TV. Menu Operation These buttons are also used as cursors in order to select items on the menu. To switch the TV on and off. To display the Main menu. To select the AV input on the TV. To EXIT a menu. To operate the TV volume. To select or store a function. To select the TV channel. VCR Operation To remove the cassette, press the EJECT Button on the VCR or press the Button for more than 3 seconds on the remote control.
Recording Timer Recording Switch on the TV to the video output channel, and insert a cassette with an intact erasure prevention tab into the VCR. Before recording, select the channel with this button (select the AV channel if you want to record a programme fed with a 21-pin Scart cable). VCR display With the On Screen Menu you can programme Timer recordings (up to 16 programmes). Switch on the TV to the video output channel, and insert a cassette with an intact erasure prevention tab into the VCR.
Timer Recording To cancel Standby mode for Timer recording; press this button and the VCR display will disappear.. Now you can playback a cassette or make a recording. After that, you must press the button again to switch the VCR to the Standby mode for Timer recording. To check the Timer recording press this button to display the [Timer recording] menu. Press this button to exit.
VCR Settings Other VCR Functions When a cassette is inserted, the VCR switches on automatically. When a cassette without an erasure prevention tab is inserted, the VCR will automatically start playback. The cassette will automatically be rewound when reaching the tape end. The CVC System (Crystal View Control) ensures optimum picture quality.
VCR Settings Setting of On Screen Displays (OSD) To change the order of the Channel positions and the names of the TV station Press Select [Tuning] Access by pressing Access [Manual] by pressing Select the Channel to be changed Access by pressing Select the input field for [POS] Input the Channel position Store the setting by pressing Select [Name] Select the input field Input the name of the TV station selecting the first letter Select the next letter Select the next letter .
Satellite- or Digital Receiver With some Satellite- or Digital Receivers it is possible to start a Timer recording, with a 21-pin Scart cable (not supplied) by using EXT LINK function. (Please read the operating instructions for your Satellite- or Digital Receiver for further information).
Functions of the NV-FJ613 EC/ECM/ECN/ECY Series (Hi-Fi) Setting the sound system The NV-FJ613 EC/ECM/ECN/ECY Series (Hi-Fi) can receive transmissions which are broadcast with NICAM sound. This is a sound system with two sound channels which broadcasts either stereo sound or two separate mono channels (M1 and M2). RF IN AC IN AV2 (DECODER/EXT) AV1 (TV) RF OUT Connecting a Decoder VCR with a 21-pin Scart cable (not supplied) to AV2 of the VCR.
Functions of the NV-FJ614 Series (Hi-Fi) TV Operation With this remote control you can operate some Panasonic TV. Please also read the operation instructions for your TV. To set the remote control to TV operation. To switch the TV on and off. To select the AV input on the TV. To operate the TV volume. To select the TV channel. To switch the screen format between the wide screen and other formats. To switch to teletext mode. To operate the teletext menu.
Functions of the NV-FJ614 Series (Hi-Fi) Timer Recording with ShowView Switch on the TV to the video output channel, insert a cassette with an intact erasure prevention tab into the VCR and set the remote control to VCR operation . Show View Press this button. Panasonic VCR 8 3 5 4 2 - - - - Enter the ShowView number. For correction use . Timer recording To access [Timer recording], press . Select your Channel [Pos] and store with (only necessary the first Timer recording for each Channel).
Troubleshooting Adjusting the Playback picture If the picture is distorted with noise bars, press the TRACKING / V-LOCK Button in the (+) or (-) direction during Playback, Still Playback or Slow Playback. For automatic adjustment, press (+) and (-) at the same time. Note: The tracking cannot be adjusted on certain cassettes. This is not a functional fault of the VCR.
Troubleshooting Before Requesting Service The VCR display is not illuminated: The mains lead is not connected. Check the connection. The VCR is set to Power save mode. Settings can be changed (see page 9). The VCR display is set to OFF. Settings can be changed (see page 9). Safety devices are operating. Disconnect the VCR from AC mains for one minute, then check if the VCR can be operated.
Index Page Add 9 3 5 3 5, 12 11 Aerial AUDIO Automatic Setting AV input AV LINK Battery 2 9 Brightness of VCR display CANCEL Channel Child Lock Clock Country CVC Date 7 3, 9, 11 8 3, 8 3 8 Decoder Delete Digital Receiver DIMMED Disposal 3, 6, 8 11 9 10 9 2 EP (SUPER LP) Erasure prevention EXT LINK 5 6, 13 6 10, 11 EJECT Fast Forward Fast Rewind 4 4 INPUT Intro Jet Scan 8 5 8 INDEX (VHS Index Search System) Page JET SEARCH Language setting Safety 8 Satellite Receiver Scart cable SEARC