Operation Manual

9
Settings of Power save and
the Brightness of the VCR display
n Press m
n Select [Other settings]
;
n Access by pressing
o
n Select [Power save] or
[VCR display]
;
n Select the input field
9
n Select the settings
:;
n Store by pressing
o
n Press e
Power save (when the VCR is switched off):
OFF The VCR is in normal operating mode
ON The VCR display is not illuminated
(the VCR is saving power)
To switch ON the VCR use button on the VCR
Adjust the Brightness of the VCR display:
(only when the Power save function is set to OFF)
ON The VCR display is brightly illuminated
DIMMED The VCR display is dimmed
OFF The VCR display is not illuminated
Setting of SQPB
(S-VHS Quasi Playback)
n Press m
n Select [Other settings]
;
n Access by pressing
o
n Select [SQPB]
;
n Select the input field
9
n Select the settings
:;
n Store by pressing
o
n Press e
SQPB settings:
AUTO VCR automatically recognises types of recordings
ON Only S-VHS recordings should be played
OFF Only VHS recordings should be played
Note:
Distorted pictures during these playback function are not functional faults.
Panasonic VCR
Other settings
Tape length : AUTO (
8
E-240)
SQPB : AUTO
Power save : OFF
VCR display :DIMMED
Panasonic VCR
Other settings
Tape length : AUTO (
8
E-240)
SQPB : AUTO
Power save : ON
VCR display : OFF
OSD : 4:3
Setting of On Screen Displays (OSD)
n Press m
n Select [Other settings]
;
n Access by pressing
o
n Select [OSD]
;
n Select the input field
9
n Select the settings
:;
n Store by pressing
o
n Press e
4:3 displays are on the edge of the screen
(the displays are not visible during playback in 16:9 format)
16:9 displays are on the edge of the screen in 16:9 format
(the displays are in the centre of the screen in 4:3 format)
OFF No On Screen Displays
Panasonic VCR
Main menu
Panasonic VCR
Other settings
Tape length : AUTO (
8
E-240)
SQPB : AUTO
Power save : OFF
VCR display : DIMMED
OSD : 4:3
Timer recording
Tuning
Clock setting
Other settings
VQT9524
Panasonic VCR
Main menu
Timer recording
Tuning
Clock setting
Other settings
Panasonic VCR
Main menu
Timer recording
Tuning
Clock setting
Other settings
Functions
Setting the sound system
The EC/ECN/ECY Series can receive
transmissions which are broadcast with NICAM sound.
This is a sound system with two sound channels which broadcasts
either stereo sound or two separate mono channels (M1 and M2).
n Press m
n Select [Tuning]
;
n Access by pressing
o
n Access [Manual] by pressing
o
n Select the channel
:;
n Access by pressing
o
n Select [Mono]
:;
n Select the input field
9
n Select the sound setting [ON] or [OFF]
:;
n Store by pressing
o
n Press e
Select the setting [Mono] to [ON] if you want to record a normal mono
sound on the Hi-Fi tracks of the VCR, for example, if the stereo sound
is distorted through the reception conditions.
Pos : 33
Name :
***
33
Channel : 124
Fine tuning : AUTO
Decoder : OFF
Video system: PAL
Mono : ON
NTSC Playback on PAL TV (For NV-FJ630, NV-FJ631)
This function allows to playback tapes which where recorded in NTSC.
On some TV pictures may be distorted during NTSC playback.
Try to adjust your TV. For this purpose, please also read
the operating instructions for your TV.
Dubbing or recording of NTSC tapes with this VCR is not possible.