Operation Manual

Editing Mode
-46-
Editing Mode
Recording from a Tape onto a Card
Still pictures or moving pictures can be recorded
on the Memory Card from scenes that have
already been recorded on a cassette. (moving
pictures on NV-GS200 Model only)
1 Set the Mode Dial (39) to Tape Playback
Mode.
2 Still Picture:
Start playback and set the Movie Camera to
Still Playback Mode at the scene you wish
to record, and press the [PHOTO SHOT]
Button
(47).
Moving Picture (NV-GS200 only):
Start playback and press the Recording
Start/Stop Button
(42) at the desired scene.
Recording Pictures from a Card onto
a Tape
Card Images can be recorded to the Tape.
1 Set the Mode Dial (39) to Picture Playback
Mode.
2 Display the first picture.
PC
S
D
(39)
PHOTO
SHOT
(47)
(42)
P
C
S
D
(39)
3 Press the [PHOTO SHOT] Button (47).
≥During the copying, the following Indication
appears.
≥It takes a few seconds to record a picture to
the Tape.
≥When recording to tape, select the tape position
before recording. The picture will be recorded to
the tape position when the [PHOTO SHOT]
Button is pressed at Step 3.
≥Photoshot index signals are automatically
recorded.
≥Moving Picture (MPEG4) cannot be recorded
from a Card to tape. (NV-GS200 only)
≥For other notes concerning this item, see
-62-.
Audio Dubbing
You can add music or narration to the recorded
Cassette.
≥If the tape recorded in the [16bit] Mode is
dubbed with the Audio Dubbing function, the
original sound is erased. (If you wish to
preserve the original sound, use the [12bit]
Mode when recording.)
≥Audio Dubbing cannot be performed on a
recording made in LP Mode. (
-20-)
1 Set [TAPE PLAYBACK MENU] >>
[AV IN/OUT] >> [AV JACK] >> [IN/OUT].
(NV-GS200 only)
2 Continuing the aforesaid setup, select
[A.DUB INPUT] >> [MIC] or [AV IN].
(NV-GS200 only)
≥Set to [AV IN] when external device is used,
and to [MIC] when an external or built-in
microphone is used.
PHOTO
SHOT
(47)
NOW RECORDING
STILL
ENTER
FADE
MENU
is
(14)
120.200B.book 46 ページ ２００４年２月２５日 水曜日 午後４時０分