Operation Manual

Editing Mode
-48-
Recording the Contents of Other
Equipment
(NV-GS200 only)
After connecting the Movie Camera and the
other equipment as illustrated, start the
following procedures.
1 AV Cable
2 S-Video Cable
≥If your TV is not equipped with AV Output
Sockets, the 21-pin Adaptor (purchase
separately) is necessary. Consult your dealer.
Movie Camera:
1 Set [TAPE PLAYBACK MENU] >>
[AV IN/OUT] >> [AV JACK] >> [IN/OUT].
2 Insert an unrecorded Cassette.
Other Equipment:
3 Insert a recorded Cassette and start
playback.
21-pin Adaptor
AV IN/OUT
PHONES
2
[S-VIDEO OUT]
1
[VIDEO OUT]
[AUDIO OUT]
S-VIDEO
IN/OUT
DV
STILL
ENTER
FADE
MENU
is
(14)
Movie Camera:
4 While pressing the [¥REC] Button (61),
press the [1] Button
(79) on the Remote
Controller.
Or while pressing the [REC] Button
(7),
press the [BACK LIGHT] Button
(8) on the
Movie Camera.
≥When recording on a card, press the
[PHOTO SHOT] Button or the Recording
Start/Stop Button.
5 Press the [;] Button (76) or [∫] Button (77)
to stop recording.
Other Equipment:
6 Press the Stop Button to stop playback.
≥For other notes concerning this item, see
-62-.
Using the DV Cable for Recording
(Digital Dubbing)
By connecting this Movie Camera to other digital
video equipment that has a DV Input/Output
Terminal with a DV Cable VW-CD1E (optional)
1, dubbing can be done in the digital format.
Player/Recorder:
1 Insert the Cassette and set to Tape
Playback Mode.
INDEX INDEXSTOP
KL
∫
V
/REW
STILL ADV
T
W
sVOL r
¥REC
MULTI/
P-IN-P
A.DUB
PLAY
PAUSE
FF/
W
STILL ADV
61 5
;
ED
P. B . Z O O M
(61)
(79)
(76)
(77)
REC
BACK LIGHT
(7)
(8)
1
DV
120.200B.book 48 ページ ２００４年２月２５日 水曜日 午後４時０分