Operation Manual

Others
-54-
MPEG4: Moving Picture (MPEG4)
(NV-GS200 only)
-40-
WEB : WEB CAMERA Mode (recording)
-51-
WEB : WEB CAMERA Mode (playback)
-51-
PRINT (Highlighted):
PictBridge Mode
-49-
0h00m00s: Recording time of MPEG4
(NV-GS200 only)
VOLUME: Volume adjustment
-36-
15:30:45: Date/Time Indication
N (F, E): Photoshot Picture Quality (during
Photoshot recording)
[F] means Fine, [N] means
Normal and [E] means Economy.
-23-
, , , : MPEG4 Picture Quality
(NV-GS200 only)
-25-
0: Remaining Number of Photoshot
pictures
R:0h00m: Remaining time of MPEG4
(NV-GS200 only)
: Continuous Photoshot Recording
-24-
: Lock Setting -43-
¥ (White): DPOF Setting completed (set to
1 or more picture)
-42-
: [1760k1320] Image size
(NV-GS200 only)
: [1520k1152] Image size
(NV-GS120 only)
: [640k480] Image size
≥For images not recorded with this Movie
Camera, the size display is determined as
follows according to the number of horizontal
pixels.
: 640 or more, less than 800 (The
size is not displayed at under
640 pixels.)
: 800 or more, less than 1024
: 1024 or more, less than 1280
: 1280 or more, less than 1600
: 1600 or more, less than 2048
: 2048 or more
(Cyan): Photoshot Mode
(Red): While Photoshot recording is
activated
(Green): While the card is being read
(Red): No Card (Still Picture Mode)
(Cyan): Moving Picture (MPEG4)
Recording Mode (NV-GS200
only)
(Red): While Moving Picture (MPEG4)
recording is activated
(NV-GS200 only)
E N F SF
1760
1520
640
640
SVGA
XGA
SXGA
UXGA
QXGA
PICTURE
PICTURE
PICTURE
PICTURE
MPEG 4
MPEG 4
ß: Video Flash turned on -33-
ßi: Video Flash (setting to [i])
(NV-GS200 only)
-33-
ßj: Video Flash (setting to [j])
(NV-GS200 only)
-33-
£: Red Eye Reduction -33-
ª To Change the Counter Display Mode
By changing [C.DISPLAY] on the [DISPLAY]
Sub-Menu, you can change the Counter Display
Mode to Tape Counter Indication [COUNTER]
(0:00.00), Memory Counter Indication [MEMORY]
(M0:00.00), and Time Code Indication
[TIMECODE] (0h00m00s00f). (
-17-) By repeatedly
pressing the [DISPLAY] Button on the Remote
Controller, you can change the Counter Display
Mode.
ª To Display Date/Time Indication
To display Date/Time Indication, set the
appropriate Date/Time in [DATE/TIME] on the
[DISPLAY] Sub-Menu. (
-17-)
You can also press the [DATE/TIME] Button of
the Remote Controller repeatedly to display or
change the Date/Time Indication.
ª To Change the Display Mode
By changing [DISPLAY] on the [DISPLAY]
Sub-Menu, you can change the Display Mode to
All Function Display [ALL] and Minimum Display
[OFF]. (
-17-)
ª Progressive Photoshot
You cannot use the Progressive Photoshot
Function in the following cases.
When using Tape Recording Mode
≥Digital Effect Modes in [EFFECT1]
≥Digital Zoom [D.ZOOM]
≥1/750 s or faster shutter speed
≥When brightness is insufficient
≥When the Night View Function is ON
≥When the Portrait Mode is used
When using Card Recording Mode
≥When brightness is insufficient
≥When the Night View Function is ON
Initializing the Modes
You can change the Menu settings back to the
shipping condition.
1 Set [TAPE RECORDING MENU] or
[CARD RECORDING MENU] >> [INITIAL] >>
[INITIAL SET] >> [YES].
≥The initializing takes a little while.
≥After the initializing is completed, the
[COMPLETED] Indication appears.
≥Initializing will not erase the clock setting (
-20-)
that has been adjusted.
120.200B.book 54 ページ ２００４年２月２５日 水曜日 午後４時０分