VQT0T20EB-ENG.book 1 ページ ２００５年１１月２１日 月曜日 午後３時５９分 Operating Instructions For PC Connection Before use, please read these instructions completely.
VQT0T20EB-ENG.book 2 ページ ２００５年１１月２１日 月曜日 午後３時５９分 Before opening the CD-ROM package, please read the following. NV-GS27: not supplied End User License Agreement (for USB Driver, SweetMovieLife and MotionDV STUDIO) You (“Licensee”) are granted a license for the Software defined in this End User Soft Agreement (“Agreement”) on condition that you agree to the terms and conditions of this Agreement.
VQT0T20EB-ENG.book 3 ページ ２００５年１１月２１日 月曜日 午後３時５９分 Contents ª WARNING: Before Use Introduction .............................................................4 Notes on these instructions.....................................4 Names and functions of packaged items ................4 Check before use ....................................................5 Operating environment............................................
VQT0T20EB-ENG.book 4 ページ ２００５年１１月２１日 Before Use Introduction You can connect your personal computer to a movie camera. You can transfer images recorded with your movie camera to your personal computer. By controlling the movie camera from the personal computer, the desired images from tape or camera can be acquired into the personal computer.
VQT0T20EB-ENG.book 5 ページ ２００５年１１月２１日 月曜日 午後３時５９分 Check before use The software available and the drivers required vary depending on the OS of the personal computer. Check the software used and the drivers required using the table below and then install them from the CD-ROM (NV-GS27: not supplied). Installation of drivers Purpose of use Copying files in the card onto the personal computer ≥PC connection mode Software used No software (The movie camera is used as a removable disc.
VQT0T20EB-ENG.book 6 ページ ２００５年１１月２１日 Operating environment ≥Despite having the operating environment indicated, it may not be possible to use the program with some types of personal computer. ≥A CD-ROM drive is required to install this program. SweetMovieLife 1.0E/ MotionDV STUDIO 5.
VQT0T20EB-ENG.
VQT0T20EB-ENG.book 8 ページ ２００５年１１月２１日 月曜日 午後３時５９分 Install/Connection (except for NV-GS27) Installing USB Driver Install this when your OS is Windows XP SP1, or Windows 2000 SP4. (When your OS is Windows XP SP2, installing USB Driver is not needed.) USB Driver is needed to be installed when you connect the movie camera to the PC with the supplied USB cable and use SweetMovieLife/MotionDV STUDIO or Web Camera. DirectX 9.0b is installed in your PC if it is not installed beforehand.
VQT0T20EB-ENG.book 9 ページ ２００５年１１月２１日 月曜日 午後３時５９分 Installing SweetMovieLife 1.0E SweetMovieLife 1.0E is aimed at entry-level users. Using this software, you can easily import video recorded with a digital video camera to a personal computer, create a title and add music to the video and then perform auto edit on it. For advanced importing and editing, use MotionDV STUDIO. 2 DirectX 9.0b is installed in your PC if it is not installed beforehand.
VQT0T20EB-ENG.book 10 ページ ２００５年１１月２１日 月曜日 午後３時５９分 Installing MotionDV STUDIO 5.6E LE MotionDV STUDIO allows more advanced editing than SweetMovieLife. Using this software allows you to capture video recorded on a tape or images viewed through the lens of a camera. Connecting the movie camera with the DV cable allows you to output images edited on a personal computer to a tape in a movie camera (NV-GS500/300/57 only). You can also add a wide variety of special effects such as fade, transition and titles.
VQT0T20EB-ENG.book 11 ページ 3 ２００５年１１月２１日 月曜日 午後３時５９分 Connecting the movie camera to personal computer ≥When you use a personal computer, use of the AC adaptor is recommended for the power supply of the movie camera. 4 1 ª Confirmation before connection (for Windows XP/2000) When you connect the personal computer and the movie camera with the USB connection cable and then use SweetMovieLife/ MotionDV STUDIO on Windows XP (SP1/SP2) or Windows 2000 (SP4), check the driver of the USB host controller.
VQT0T20EB-ENG.book 12 ページ ２００５年１１月２１日 月曜日 午後３時５９分 Software Using SweetMovieLife 1.0E/ MotionDV STUDIO 5.6E LE (Windows XP SP2, Windows 2000 SP4) (except for NV-GS27) If you wish to capture data from a tape, set the movie camera to tape playback mode and insert the tape. If you wish to capture images from the lens of the movie camera, set the movie camera to the tape recording mode and remove the tape and the card.
VQT0T20EB-ENG.book 13 ページ ２００５年１１月２１日 月曜日 午後３時５９分 With USB connection cable (supplied) The personal computer should be compatible with USB 2.0 Hi-Speed. 1 Set the movie camera to tape playback mode or tape recording mode. ≥You cannot use SweetMovieLife in tape recording mode. 2 Set [BASIC] or [ADVANCED] >> [USB FUNCTION] >> [MOTION DV]. 1) 3 Connect the movie camera to personal computer with auxiliary USB connection cable.
VQT0T20EB-ENG.book 14 ページ ２００５年１１月２１日 月曜日 午後３時５９分 Using the movie camera as a Web Camera (Windows XP SP1/SP2, Windows 2000 SP4) (NV-GS27: Windows XP SP2 only) To upgrade Windows XP to SP2, click [start] >> [All Programs (Programs)] >> [Windows Update]. If the movie camera is connected to your personal computer, you can send video and sound from the movie camera to the other parties via the network. Audio may also be exchanged if the personal computer is configured accordingly.
VQT0T20EB-ENG.book 15 ページ ２００５年１１月２１日 月曜日 午後３時５９分 Others Copying files to a personal computer - Card reader function (Mass storage) (NV-GS37/27: not available) If you connect the movie camera to a personal computer with the USB cable, you can use the movie camera which includes a card as a external drive of a personal computer and you can copy files recorded on the card to the personal computer with [Explorer] etc.
VQT0T20EB-ENG.book 16 ページ 1 ２００５年１１月２１日 月曜日 午後３時５９分 To disconnect USB cable safely (except for NV-GS37/27) 2 If USB cable is disconnected while computer is on, error dialogue may appear. In such case click [OK] and close the dialogue box. By following the steps below you can disconnect the cable safely. 1 Double click the icon in task tray. ≥Hardware disconnect dialogue appears. 2 Select [USB Mass Storage Device] and click [Stop]. 3 Verify [Matshita DVC USB Device] is selected and click [OK].
VQT0T20EB-ENG.book 17 ページ ２００５年１１月２１日 月曜日 午後３時５９分 Using on Macintosh ª Operating environment on iMovie 4/iMovie HD OS: With pre-installed; Mac OS X v10.3 to 10.4 CPU: PowerPC G3 (400 MHz or higher), G4, G5 Interface: DV (FireWire) ≥Supplied CD-ROM is available for Windows only. ≥iMovie/iMovie HD, included with any new Macintosh or sold with iLife. ≥For more information, please contact Apple Computer, Inc. at http://www.apple.com.
VQT0T20EB-ENG.book 18 ページ ２００５年１１月２１日 月曜日 午後３時５９分 Notes ≥Do not disconnect USB connection cable while the status indicator of the movie camera is on. It may freeze the software or destroy the data in transfer. Please refer to the operating instructions of movie camera. ≥When the movie camera is switched to the PC connection mode while it is connected to the personal computer, the operation mode of the movie camera cannot be switched. In this case, disconnect the USB connection cable.
VQT0T20EB-ENG.
VQT0T20EB-ENG.book 20 ページ ２００５年１１月２１日 月曜日 午後３時５９分 B VQT0T20 F1105Mk0 ( 7000 A ) C Matsushita Electric Industrial Co., Ltd. Web site: http://www.panasonic.co.
