Operating Instructions

Advanced Operations
6766
Title Procedure Remarks, etc.
Using the MultiMediaCard
(NV-DS25 only)
You can use the supplied MultiMediaCard to record still
pictures onto it, even without a cassette inserted. You
can also take favourite scenes recorded on the
cassette and copy them as still pictures onto the
MultiMediaCard, or you can copy still pictures recorded
on the MultiMediaCard onto the cassette.
º Inserting the MultiMediaCard
Be sure to turn the Movie Camera off
before inserting the MultiMediaCard.
Set the [OFF/ON] Switch to [OFF].
3
Close the Card Slot Cover securely.
1
Slide the [OPEN] Lever
to the left to open the
Card Slot Cover.
2
Hold the
MultiMediaCard with its
cut-off corner facing
right and toward the
Movie Camera and
insert it straight until it
stops.
º Taking Out the MultiMediaCard
Be sure to turn the Movie Camera off before taking out
the MultiMediaCard.
Set the [OFF/ON] Switch to [OFF].

Pull the
MultiMediaCard
straight out.

Slide the [OPEN] Lever
to the left to open the
Card Slot Cover.

Push the
MultiMediaCard on its
centre.

Close the Card Slot
Cover securely.
³Do not turn the Movie Camera off while the
MultiMediaCard is being read, such as during Card
Photoshot recording, copying pictures onto the
cassette, erasing pictures on the MultiMediaCard or
using the Multi-Picture Function in the Card Playback
Mode.
This could damage the MultiMediaCard or recorded
contents, and even cause malfunction of the Movie
Camera.
³Before closing the Card Slot Cover, be sure to
confirm that the MultiMediaCard is inserted correctly.
The [ACCESS] Lamp
While accessing the MultiMediaCard (reading,
recording, playing back, deleting, transmitting pictures),
the [ACCESS] Lamp is lit.
³While the [ACCESS] Lamp is lit, do not open the Card
Slot Cover and remove the MultiMediaCard, or turn
the Movie Camera off. Doing so could damage the
card and cause a malfunction with the Movie Camera.
ON
OFF
ON
OFF
CAMERA
VCR
MODE
CARD
P. B
ON
OFF
OPEN
OPEN
[Access] Lamp