Operating Instructions

Editing
8786
[S-VIDEO OUT]
[AV OUT]
[S-VIDEO IN]
[AUDIO IN]
[EDITE]
Editing Controller
(VW-EC500E)
Editing Controller
(VW-EC1E)
To Edit Socket
[DC IN]
[VIDEO IN]
21 pin
Adaptor
S-VIDEO OUT
EDIT
AV OUT/
PHONES
D.STILL
PICTURE
E
Copying with the Help of an Editing Controller
If you connect the Movie Camera to an Editing Controller equipped with 5-pin Edit Socket, this Movie Camera’s
playback functions can be controlled from the Editing Controller.
When Connecting the Editing Controller VW-
EC500E (optional)
³When you perform editing with the NV-HS1000
VCR (optional) connected to this Movie Camera,
first activate the Still Playback Mode on the
Movie Camera and then start the actual editing
operation.
³A VCR equipped with 5-pin Edit Socket is
necessary.
³When you connect the VW-EC500E to the Movie
Camera, an adjustment on the VW-EC500E is
necessary. For the operation of the Editing
Controller, refer to its operating instructions.
When Connecting the Editing Controller VW-
EC1E (optional)
³When you perform editing with the NV-HS1000
VCR (optional) connected to this Movie Camera,
first activate the Still Playback Mode on the
Movie Camera and then start the actual editing
operation.
³When you use the Editing Controller VW-EC1E,
it is not necessary to connect it to the Edit Socket
on the VCR, as the VCR’s operation is performed
via infrared remote control. Therefore, editing is
also possible onto VCRs not equipped with an
Edit Socket.
³For the operation of the Editing Controller, refer
to its operating instructions.
When Editing with Time Code
Set [C.DISPLAY] on the [DISPLAY SETUP] Sub-
Menu of the [VCR FUNCTIONS] Main-Menu to
[TIMECODE] to make the Time Code appear.
³When the Time Code is displayed, the Time
Code Signal is output from the Edit Socket.
³When the Counter Indication is displayed, the
Linear Tape Counter Signal is output.
³If your VCR is not equipped with AV Input
Sockets, the 21pin Adaptor (purchase
separately) is necessary. Consult your dealer.
Using the Movie Camera with a Computer
The Personal Computer Connection Kit VW-
DTA9E (optional), or VW-DTA10B (optional)
makes it possible to connect the Movie Camera to
a computer and transmit still video images to it.
The above illustration shows the connections
in case of using the VW-DTA10B. For the VW-
DTA9E, refer to its operating instructions.
Computer System Requirements (VW-
DTA10B)
DV STUDIO2 can be installed in a PC/AT
compatible personal computer which can run
Microsoft
®
Windows
®
95/98.
Compatible machines:
Personal computer with 80486DX4 or higher CPU
(Pentium
TM
or higher recommended)
Graphic card:
True Color (approx. 16.7 million colours)
recommended (operation also possible even with
256 colours)
Installed memory:
16 MB or more (32 MB or more recommended)
Free hard disk space: At least 16 MB
Disk drive: CD-ROM drive
Ports: RS-232C (D-sub 9 pin)/or USB
Other requirements: Mouse
To connect the Movie Camera to the computer,
use the special Interface Box
1 contained in the
Personal Computer Connection Kit.
³If your VCR is not equipped with AV Input
Sockets, the 21pin Adaptor (purchase
separately) is necessary. Consult your dealer.
³To use the DV STUDIO2 software via USB, a
computer with Windows
®
98 preinstalled is
necessary.
³Pictures that you intend to import from cassette
into computer applications should be recorded in
the SP Mode.
³When recording, take care that the Time Code is
uninterrupted from the beginning of the tape.
³For detailed explanations on the operating
environment, connections and operations, refer
to the Personal Computer Connection Kit’s
operating instructions.
³Windows
®
is a trademark of Microsoft
Corporation U.S.A.
³All other company and product names in the
operating instructions are trademarks of their
respective corporations.
1
[S-VIDEO OUT]
[AV OUT]
[D.STILL PICTURE]
[IR TRANSMITTER]
[DIGITAL STILL PICTURE]
21 pin Adaptor
2
Interface Box
1
AC Adaptor
2
S-VIDEO OUT
EDIT
AV OUT/
PHONES
D.STILL
PICTURE
E