Operating Instructions

Editing
8988
S-VIDEO OUT
EDIT
E
Using the Movie Camera with a Video Printer
If you connect the Movie Camera to a Video Printer, you can print still pictures from scenes recorded with the
Movie Camera.
If you do not intend to use the Automatic Printing Function, connecting the Edit Cable is not necessary.
[EDIT-]
S-Video Cable
[S-VIDEO IN][EDIT]
Edit Cable VW-K5E
(optional)
Movie Camera:
1 Set the [OFF/ON] Switch to [ON] to turn the
Movie Camera on.
2 Press the [MODE] Button until the [VCR]
Lamp lights.
4 Press the Play Button [1].
Video Printer:
3 Turn the Video Printer on.
5 Store the image in memory.
6 Start printing.
³For details about the operation of the Video
Printer, read its operating instructions.
³Compatibility cannot be guaranteed for pictures
recorded on other video equipment and played
back on this Movie Camera, or vice versa.
º Using the Automatic Printing Function
(Autoprint)
If you connect the Movie Camera to a Video
Printer equipped with 5-pin Edit Socket, you can
use the Autoprint Function to automatically print all
still pictures recorded in the Photoshot Mode.
Video Printer:
1 Turn the Video Printer on.
2 Make the necessary settings on the Video
Printer according to the input signal.
Movie Camera:
3 Set the [OFF/ON] Switch to [ON] to turn the
Movie Camera on.
4 Press the [MODE] Button until the [VCR]
Lamp lights.
5 Search for the first still picture from which
you want to start printing with the
Autoprint Function.
If you want to print all still pictures recorded
on the cassette, rewind the tape to its
beginning.
6 Press the [MENU] Button.
7 Set [AUTO PRINT] on the [PLAYBACK
FUNCTIONS] Sub-Menu to [YES].
Automatic printing starts.
³If you want to stop the automatic printing in the
middle, press the Stop Button [º] on the Movie
Camera.
³When the cooling function of the Video Printer is
activated and the printing speed slows down,
automatic printing may stop. In this case, set
[AUTO PRINT] on the [PLAYBACK FUNCTIONS]
Sub-Menu on the [VCR FUNCTIONS] Main-
Menu to [YES] again.
³If still pictures are recorded successively in the
Photoshot Mode, some pictures may be skipped
during printing.
³Before storing an image in memory on the Video
Printer, press the [OSD] Button (p. 80) on the
Remote Controller of the Movie Camera so that
no indications appear in the picture. Otherwise,
the Counter Indication and other function
indications are also printed in the picture.
³The [PRINTER ERROR] Indication appears if the
Movie Camera is not correctly connected to the
Video Printer or when the ink cassette and/or the
paper in the Video Printer are not loaded or used
up.
³As index signals are not recorded with the still
pictures recorded in the Continuous Photoshot
Mode, automatic printing of these pictures is not
possible.
³If you replace the ink cassette or paper during
printing, the same picture may be printed twice.
³In the following cases, some pictures may be
skipped when printing with the Auto Print
Function.
³
When you print still pictures recorded in the
Photoshot Mode on a video camera of another
brand.
³
If you turn the Movie Camera on and off several
times (3 times or more) between recording two
still pictures in the Photoshot Mode.
³
When you record a still picture in the Photoshot
Mode on the same part of a cassette where a
Photoshot picture was recorded before.
³
When you select a different recording speed
(SP/LP) between the recording of two still
pictures in the Photoshot Mode.
³
At the first Photoshot picture to be printed.
³A picture that is recorded very close to the
beginning of the tape may not be printed.
³Pictures that you have edited or composed on a
Video Printer (NV-MPD1B, NV-MPD5B, NV-
MPD7B) can be recorded on the
MultiMediaCard, however, they can no longer be
played back on this Movie Camera. (NV-DS25
only)
[S-VIDEO OUT]