Operating Instructions - Language - English

7
Í
OK
MENU
EXIT
OK
Country
Belgien
Belgique
België
Danmark
España
Ελλάδα
France
Italia
Nederland
Norge
Deutschland
Österreich
Portugal
Suomi
Sverige
Schweiz
Suisse
Svizzera
others
Panasonic VCR
1
2
3
4
5
6
7
If you are connecting your VCR to a TV using only RF coaxial
cable, then follow the steps. (RF Connection)
RF Coaxial cable must be connected to watch TV channels.
Press the [VCR-ON/OFF] button
to turn on the VCR and tune
your TV until the Country setting
menu appears on the TV
screen.
Press the [Cursor] buttons 3421.
Select the country where you are using the VCR.
Press the [OK] button.
The VCR’s Auto Setup automatically starts and tunes all
available TV stations and also sets the clock. This takes
about 5 minutes.
When the indication appears on
the VCR display, the Auto Setup
is complete.
If, after setup, the picture on the video playback channel
is distorted, change the RF output channel on the VCR to
another number.
Press the [MENU] button for more than 5 seconds.
The RF output channel number appears on the VCR
display.
The initial setting is channel 36.
Press the [Numeric] buttons.
Change the RF output channel.
Enter a channel number which differs by 2 or 3 from the
one initially set number. For example, as the original
number is 36, enter 39.
Retune your TV to the VCR’s new RF output channel.
Press the [OK] button to conclude the setting.
To cancel the Auto Setup before it has finished
Press the [EXIT] button .
When the clock setting menu appears after Auto Setup
has finished
Press the [Cursor] buttons 3421 to set the correct
time and date.
Press the [OK] button to conclude the setting.
1 Aerial Input socket
2 Aerial Output socket
3 Aerial (not supplied)
4 Aerial lead (not supplied)
5 TV (not supplied)
6 Aerial Input socket
7 RF Coaxial cable (supplied)
To confirm that the TV stations have been tuned correctly
by the Auto Setup function
See page 15.
When no station has been set, confirm all connections of
the VCR again and restart the Auto Setup
See page 16.
When the station names and/or channel numbers have
not been set correctly
See page 15.
Hint:
– If you select [Schweiz], [Suisse] or [Svizzera] on the
Country setting menu, the other setting menu appears
automatically to let you set [Power save] to [ON]. In this
setting, the VCR’s power consumption is minimised when it
is off (Standby mode). To turn the VCR on, keep the [VCR-
ON/OFF] button pressed on the VCR main unit, not with the
remote control.
OK