Operating Instructions - Language - English

6
Connections (with Scart leads)
Follow the step-by-step guide below.
1
Connect the aerial to the RF Input socket of the VCR.
2
Connect the RF lead from the RF Output socket of the VCR to
the TV aerial input socket.
3
Connect the AV1 21-pin scart socket to TV scart socket
(optional). If your TV does not have a scart socket or you do not
have a scart lead, skip this step.
• This is necessary for Download from TV with Q Link function.
4
Connect the AV2 21-pin scart socket to the VCR Scart Socket
on your Satellite Receiver/Digital Sat receiver. If you are not
connecting a Satellite Receiver, skip this step.
5
Connect the TV scart socket of your Satellite Receiver to the
AV2 scart socket of your TV (optional).
If you are not connecting a Satellite Receiver, skip this step.
6
Plug the TV, VCR and Satellite Receiver into the mains as
shown at top of the page.
1
2
3
4
5
6
6
6
RF Input socket
RF Output socket
AV1 21-pin Scart socket
AV2 21-pin Scart socket
Aerial
(not supplied)
TV [with or without Q Link function]
(not supplied)
Note:
21-pin Scart leads are not supplied.
To AC Mains socket
AV2 socket
AV1 socket
Aerial Input
socket
RF lead
(supplied)
Necessary For TV with
Q Link
Necessary for Connecting
a Satellite Receiver
Optional Connection
AC Mains lead (supplied)
To AC Mains socket
21-pin Scart socket
(VCR)
AC Input socket
Satellite Receiver (not supplied)
21-pin Scart socket (TV)
Example of NV-FJ780B
VCR
TV
TVVCR
VCR
VCR
Satellite Receiver
TV
Satellite Receiver
AV2
(
DECODER/DECODEUR/EXT
)
IN
ENT
RF
ANT
OUT
SORTIE
IN
ENT
RF
ANT
OUT
SORTIE
AV1
(
TV
)