Operating Instructions

11
VQT0W30
Connecting the movie camera to personal
computer
≥When you use a personal computer, use of the AC adaptor is
recommended for the power supply of the movie camera.
ª Confirmation before connection
(for Windows XP/2000)
When you connect the personal computer and the movie camera
with the USB connection cable and then use SweetMovieLife/
MotionDV STUDIO on Windows XP (SP1/SP2) or Windows 2000
(SP4), check the driver of the USB host controller.
≥It is required to use the driver for which [Microsoft] is
displayed on [Driver Provider] in [Driver] tab.
1 Select [start] >> [Settings] >> [Control Panel] to start
[System].
≥[System Properties] is displayed.
2 Click [Hardware] tab and then click [Device Manager].
3 Right-click [Enhanced Host Controller] etc. in [Device
Manager] and then select [Properties].
≥The indication [Enhanced Host Controller] is changed as
[EHCI] depending on the host controller you use.
4 Click [Driver] tab to check the description on [Driver
Provider].
≥If [Microsoft] is displayed on [Driver Provider], the confirmation
procedure is completed.
If a description other than [Microsoft] is displayed
≥Update the driver with the following procedure.
1 Click [Update Driver...].
2 Check [Install from a list or specific location
(Advanced)] and then click [Next].
≥When your OS is Windows 2000, click [Next] after [Update
Device Driver Wizard] appears.
3 (When your OS is Windows XP)
Check [Don’t search. I will choose the driver to
install] and then click [Next].
(When your OS is Windows 2000)
Check [Display a list of the known drivers for this
device so that I can choose a specific driver] and
then click [Next].
4 Click [Standard Universal PCI to USB Host
Controller] and then click [Next].
5 Click [Finish].
≥The update of the driver is completed. Connect the movie
camera.
2
3
1
4
3
4
VQT0W30GCT-ENG.book 11 ページ ２００６年１月２４日 火曜日 午前１０時５４分