Operating instructions

Before Use
-50-
prevention slider (by sliding it to the [REC] arrow
direction).
≥For other notes concerning this item, see
-76-.
Turning on the Movie Camera
ª How to Turn on the Power
1
Set the [OFF/ON] Switch (42) to [ON] while
pressing the button 1.
≥The [POWER] Lamp
(43) lights up.
ª How to Turn off the Power
1 Set the [OFF/ON] Switch (42) to [OFF] while
pressing the button 1.
Selecting Modes
You can choose a desired mode by rotating the
Mode Dial.
1 Rotate the Mode Dial (39).
:Tape Recording Mode
Use this mode when recording pictures on a tape.
:Tape Playback Mode
Use this mode when playing back the recorded
scene on a tape.
Using the Viewfinder/LCD Monitor
ª Using the Viewfinder
Before using the Viewfinder, adjust the field of
view so that the displays inside the Viewfinder
become clear and easy to read.
R E C
SAVE
1
ON
OFF
(42)
(43)
1
ON
OFF
(42)
1
(39)
1 Pull the Viewfinder.
2 Adjust by turning the Eyepiece Corrector
Knob
(34).
To Use the Viewfinder at the Same Time as the
LCD Monitor
Set [LCD/EVF] >> [EVF ON/AUTO] >> [ON].
≥The Viewfinder does not turn off even if the LCD
Monitor is opened.
≥When you turn the Movie Camera off, this
setting is cancelled.
ª Using the LCD Monitor
With the LCD Monitor open, you can also record
the picture while watching it.
1 Put a finger on the [OPEN4] Knob (1) and
pull the LCD Monitor
(2) out in the direction
of the arrow.
≥The Viewfinder is deactivated.
≥The LCD Monitor can be opened a maximum
of 120o. If you open the LCD monitor by 120o,
it becomes convenient to operate menus or to
play back pictures.
2 Adjust the LCD Monitor angle according to
the desired recording angle.
≥The LCD Monitor can rotate a maximum of
180o 1 from the vertical position upwards
and a maximum of 90o 2 to the downward
direction. Forcefully rotating the LCD Monitor
beyond these ranges will damage the Movie
Camera.
12:30:45
15.10.2004
12:30:45
15.10.2004
12:30:45
15.10.2004
12:30:45
15.10.2004
(34)
(2)
(1)
290o1180o
33GC-ENG.book 50 ページ ２００４年２月２５日 水曜日 午後２時５０分