Operating instructions

Record mode
27
LSQT1039
ª About the variable speed zoom
function
≥When pushing the [W/T] lever as far as it will go,
you can zoom from 1k to 30k in 3.5 seconds at
the maximum.
≥The zoom speed varies according to the amount
of movement of the [W/T] lever.
≥The variable speed zoom function cannot be
used with the remote control. (NV-GS57 only)
ª
To use the zoom microphone function
Interlocked with the zooming operation, the
microphone will collect sounds clearly far away
with the tele-shot or those in the vicinity with the
wide-angle shot.
≥Set to Tape Recording Mode.
1 Set [ADVANCED] >> [ZOOM MIC] >> [ON].
Recording yourself
You can record yourself while viewing the LCD
monitor. You can record persons in front of the
camera while presenting them the image. The
image is horizontally flipped as if you see a mirror
image. (The image to be recorded is the same as
that recording.)
≥Extend the viewfinder to see the picture
while recording.
1 Rotate the LCD monitor towards the lens
side.
≥A vertically oriented display appears on the
viewfinder screen, this is normal and not
indicative of any trouble.
≥When the LCD monitor is rotated towards the
lens side, the icon will not be displayed even if
you push the centre of the joystick.
Backlight compensation function
This protects a backlit subject from being
darkened.
≥Set to Tape/Card Recording Mode.
1 Press the joystick to display the icon. Move
the joystick down until icon 1 appears.
2 Move the joystick up to select the backlight
compensation icon [ ].
≥The [BACKLIGHT COMPENSATION ON]
indication appears on the screen of the movie
camera.
≥The image on the screen will become
brighter.
ª
To return to normal recording
Select the [ ] icon again.
≥The [BACKLIGHT COMPENSATION OFF]
indication appears on the screen of the movie
camera.
≥If you turn off the power or operate the mode
dial, the backlight compensation is cancelled.
ZOOM
ª
1
LSQT1039ENG.book 27 ページ ２００６年２月１日 水曜日 午後３時１３分