Operating instructions
Record mode
30
LSQT1039
Self-timer recording (NV-GS57 only)
You can record still pictures on a card using the
timer.
≥Set to Card Recording Mode.
1 Press the joystick to display the icon. Move
the joystick down until icon 1 appears.
2 Move the joystick left to select the self-timer
recording icon [ ].
≥The [SELF-TIMER ON] indication appears on
the screen of the movie camera.
3 Press the [PHOTO SHOT] button.
≥After the recording lamp and the [ ]
indication flashes for approx. 10 seconds,
recording will start. After recording, the
self-timer will be cancelled.
ª
To stop the timer midway through
Press the [MENU] button.
≥The self-timer standby mode is cancelled when
you turn off the power or operate the mode dial.
≥If the continuous photoshot recording is set, the
maximum recordable pictures are recorded.
Recording images for wide-screen
TVs
This allows you to record images compatible with
wide-screen TVs.
Cinema Function
Images are recorded with a black belt appearing
along the top and bottom of the screen so that
they look like theatre movies.
≥Set to Tape Recording Mode.
1 Set [BASIC] >> [CINEMA] >> [ON].
ª
To cancel the Cinema function
Set [BASIC] >> [CINEMA] >> [OFF].
≥Images played back vary depending on the TV
connected. Please refer to the operating
instructions for your TV.
≥This function does not widen the recording
range.
≥When images are played back on a TV screen,
the date/time indication may be erased in some
cases.
≥Depending on the TV, the picture quality may
deteriorate.
≥When a cinema picture is imported into a
personal computer, the imported picture may
not be displayed correctly, depending on the
software in used.
1
PHOTO
SHOT
LSQT1039ENG.book 30 ページ 2006年2月1日 水曜日 午後3時13分