Operating instructions
Playback mode
40
LSQT1039
Deleting files recorded on a card
(NV-GS57 only)
The deleted files cannot be restored.
≥Set to Card Playback Mode.
1 Move the joystick left or right to select a file
to delete.
≥You can select a file in the multi-screen display.
After selecting the file, press the joystick and
display the operation icon.
2 Move the joystick down to select [ ].
3 Move the joystick up or down in order to
select [DELETE 1 FILE] and then press it.
4 When the confirming message appears,
select [YES] and press the joystick.
≥In order to stop deletion, select [NO].
ª
To delete all files
1 Move the joystick down to select [ ].
2 Move the joystick up or down in order to
select [ALL FILES] and then press it.
3 When the confirming message appears,
select [YES] and press the joystick.
≥Do not turn off the power while deleting.
≥To delete files, use the AC adapter or a
sufficiently charged battery.
≥In case of [ALL FILES], the deletion may take
time if there are many files on the card.
≥If the “CARD FULL” indication appears when
recording, the card is full and no further data
can be recorded. Insert a new card or set the
camera to Card Playback Mode and delete
unnecessary files.
≥If files conforming to DCF standard are deleted,
all the data related to the files will be deleted.
ª
Deleting still picture files recorded on
a card by other equipment
≥A still picture file (other than JPEG) that cannot
be played back on the movie camera may be
erased.
Formatting a card (NV-GS57 only)
Please be aware that if a card is formatted, then
all the data recorded on the card will be erased.
Store important data on a personal computer, etc.
≥Set to Card Playback Mode.
1 Set [ADVANCED] >> [FORMAT CARD] >>
[YES].
2 When the confirmation message appears,
select [YES] and press the joystick in order
to format the card.
≥In order to stop formatting, select [NO].
≥Normally, it is not necessary to format the card.
If a message appears even though you insert
and remove the card several times, format it.
≥If the SD Memory Card is formatted on other
equipment, the time spent for recording may
become longer. If the SD Memory Card is
formatted on a PC, it cannot be used on the
movie camera. Format the SD Memory Card on
the movie camera, in this case.
≥Do not remove the card or turn off the power
while formatting.
≥The movie camera supports SD Memory Cards
formatted in FAT12 system and FAT16 system
based on SD Memory Card Specifications.
LSQT1039ENG.book 40 ページ 2006年2月1日 水曜日 午後3時13分