Operating instructions
Others
51
LSQT1039
CAN NOT USE USB:
You are connecting the USB cable with the
DV cable connected.
CHANGE TO MANUAL MODE:
You are attempting to select the item on the
[SCENE MODE] when the [AUTO/
MANUAL/FOCUS] switch is set to [AUTO].
CAN NOT OPERATE (MOTION DV MODE):
You are attempting to change [D.ZOOM]
setting during MotionDV Mode.
REVERSE THE LCD MONITOR:
When the LCD monitor is rotated by 180°
towards the lens, the brightness of the LCD
monitor cannot be adjusted.
TURN OFF THE VIDEO LIGHT:
You are attempting to select an item in
[SCENE MODE] when light is on.
CANCEL NIGHT VIEW MODE:
You are attempting to select an item other
than [OFF] in [SCENE MODE] during colour
night view mode.
Functions cannot be used
simultaneously
Some functions in the movie camera are disabled
or cannot be selected due to its specifications.
The table below shows examples of functions
restricted by conditions.
Functions Conditions which disable
the functions
≥Digital zoom
≥Fade
≥When the Card Recording
mode is used
≥Image stabilizer ≥When the Card Recording
mode is used
≥When the colour night
view function is used
≥When the built-in LED
video light lights and the
gain up mode is set to on
(NV-GS57 only)
≥Backlight
compensation
≥When the iris/gain is set
≥When the colour night
view function is used
≥When the built-in LED
video light lights and the
gain up mode is set to on
(NV-GS57 only)
≥Help mode
≥Blank search
≥Soft skin
≥Recording
check
≥While recording to a tape
≥Colour Night
View
≥While recording to a tape
≥When the Card Recording
mode is used
≥When the built-in LED
video light lights and the
gain up mode is set to on
(NV-GS57 only)
≥Scene mode ≥When setting the
[AUTO/MANUAL/FOCUS]
switch to [AUTO]
≥When the colour night
view function is used
≥When the built-in LED
video light lights
(NV-GS57 only)
LSQT1039ENG.book 51 ページ 2006年2月1日 水曜日 午後3時13分