NV-MV21EE_GCU.book 1 ページ ２００４年３月４日 木曜日 午前９時２０分 Operating Instructions Инструкции по эксплуатации Video Cassette Recorder Model No.
NV-MV21EE_GCU.book 2 ページ ２００４年３月４日 木曜日 午前９時２０分 Longrun Head System Warning and Important Information This longrun head system enables approximately 8,000 hours of recording/playback in high quality images. Newly developed head cylinder with narrower head windows and tapered cylinder design effectively protects heads from dust and prevents head clogging. Plus, [Alumina] Head Cleaner further enhanced cleaning efficiency. • Based on in-house tests with Panasonic video cassettes.
NV-MV21EE_GCU.
NV-MV21EE_GCU.book 4 ページ ２００４年３月４日 木曜日 午前９時２０分 TV Operation Connections Only Panasonic TVs can be operated with the provided remote control. This section shows you how to connect the VCR to an aerial, TV, etc. The settings for operating the TV with the remote control have already been made. No additional settings need to be performed. When the VCR is turned on after unpacking and connecting the aerial cable and the mains lead, Plug in Auto Tuning starts automatically.
NV-MV21EE_GCU.book 5 ページ ２００４年３月４日 木曜日 午前９時２０分 Tuning the TV to Your VCR Storing TV Broadcasts in Your VCR The VCR supplies a signal to the TV via the RF coaxial cable on channel E21-E69. If you have connected the VCR to the TV through the Audio/ Video input sockets, then you do not need to follow the procedure below. To view the pictures from the VCR, set to the AV mode on the TV with [AV] (2).
NV-MV21EE_GCU.book 6 ページ ２００４年３月４日 木曜日 午前９時２０分 Auto Tuning Using the On Screen Display Manual Tuning Procedure Introduction The VCR is tuned automatically by Plug in Auto Tuning. However, Auto Tuning using the On Screen Display should be performed according to the following method if necessary. If the VCR is not correctly tuned by Auto Tuning, follow the procedure below. Preparations • Confirm that the TV is on and the VCR viewing channel is selected.
NV-MV21EE_GCU.book 7 ページ ２００４年３月４日 木曜日 午前９時２０分 1 Press [MENU] (9) to display the Main menu on the TV screen. Language Setting of the On Screen Display 2 Press [43] (28) to select [CLOCK SET] then press [ENTER] (26). Select one of the 2 languages displayed: English and Russian. 3 When the current clock displays on the VCR is between 11:58.00 and 12:01.59, press [MENU] (9) as soon as you see the 12:00.00. This resets the time to 12:00.00.
NV-MV21EE_GCU.book 8 ページ ２００４年３月４日 木曜日 午前９時２０分 3 Present time/Tape counter/Remaining tape time/Index Search/OTR indication/JET Rewind Information Display Present time 17:24 Tape counter 0:02.54 Remaining tape time REMAIN 2:34 Index Search S 01 OTR indication OTR 60 JET Rewind J . REW Option Setting MENU LANGUAGE CLOCK SET TUNER PRESET SYSTEM OPTION TAPE REFRESH NAVI MEMORY 0PROG.
NV-MV21EE_GCU.book 9 ページ ２００４年３月４日 木曜日 午前９時２０分 OSD REC: To set the conditions for the OSD Recording function. • Press [2 1] (28) to select [ON] or [OFF]. OFF: ON: Playback Preparations • Confirm that the VCR is on. • Confirm that the TV is on and the VCR viewing channel is selected. • Insert a recorded video cassette. Initially set at this position. This setting enables OSD Recording. (See page 11.) If you select [ON], [JET NAVIGATOR] is set to [OFF] automatically.
NV-MV21EE_GCU.book 10 ページ ２００４年３月４日 木曜日 午前９時２０分 To Play Back a Recorded Part Repeatedly Recording Press [REPEAT] (30). The [R] indication appears on the VCR display. • A recorded part on the tape must be at least 15 minutes long. • When recording over the same location on a tape, it may not function correctly. Preparations • Confirm that the VCR is on. • Confirm that the TV is on and the VCR viewing channel is selected. Operations 1 Insert a video cassette with an intact erasure prevention tab.
NV-MV21EE_GCU.book 11 ページ ２００４年３月４日 木曜日 午前９時２０分 To Display the Approximate Remaining Tape Time To Record the Present Date and Time (OSD Recording) on the same screen as the picture The remaining tape time can be displayed in the VCR display. 1 Select [TAPE SELECT] from the On Screen Display and select the corresponding video cassette tape length. See page 8. This function allows you to record the present date and time on the same screen as the picture being recorded.
NV-MV21EE_GCU.book 12 ページ ２００４年３月４日 木曜日 午前９時２０分 Recording from an external source To Delete all of a Cassette’s Contents (Tape Refresh Function) This function can be used to make up an edited tape from other recordings or video sources. A new scene can be added to the end of previous one. You can delete a cassette contents (the picture, the sound and the Jet Navigator data) all at once.
NV-MV21EE_GCU.book 13 ページ ２００４年３月４日 木曜日 午前９時２０分 9 Press [TIMER (REC)] (14) to switch the VCR over to the timer recording standby mode. • When [JET NAVIGATOR] is set to [ON] (see page 8), the [PROGRAMME IS COMPLETE. REMAINING PROGRAMME 49.]* message appears. • When [JET NAVIGATOR] is set to [OFF] (see page 8), the [PROGRAMME IS COMPLETE.]* message appears. * These messages will not appear if timer recording is started immediately after [TIMER (REC)] (14) is pressed.
NV-MV21EE_GCU.book 14 ページ ２００４年３月４日 木曜日 午前９時２０分 Setting other Programmes in Succession Timer recording for the same programme on the next week (Intelligent Timer) Repeat steps 1-9 of Easy Timer Programming (page 13). When you wish to set the timer recording for programmes which will be recorded within 1 week and you have ever recorded the programmes before, you can record them soon with I-TIMER function without entering day and time by buttons.
NV-MV21EE_GCU.book 15 ページ ２００４年３月４日 木曜日 午前９時２０分 To Delete the Jet Navigator Data of a Single Video Cassette Tape Search Functions Keep [CANCEL] (5) pressed for more than 5 seconds while the Jet Navigator list appears. [ss] appears on the list. See page 8 to delete all the Jet Navigator data stored in the VCR memory. Jet Navigator This VCR can display a list of the recorded programmes on the inserted video cassette on the TV screen.
NV-MV21EE_GCU.book 16 ページ ２００４年３月４日 木曜日 午前９時２０分 To Demonstrate the Jet Navigator Function Keep [NAVI] (25) pressed for more than 5 seconds without inserting a cassette tape. Notes: • Searching in either direction is possible up to the 20th index signal. • If you press either of [INDEX] (13) too many times, simply press the other [INDEX] (13) (indicating the opposite direction) to correct it. In this way, you can reduce the displayed figure down to 1.
NV-MV21EE_GCU.book 17 ページ ２００４年３月４日 木曜日 午前９時２０分 • The playback picture is distorted when record the tape in the EP mode using MESECAM system. #However, this is not a malfunction. #We recommend PAL system for recording in the EP mode. Before Requesting Service Message of On Screen Display The error message is indicated in brackets [ ]. Recording will not operate correctly The symptom description is indicated in brackets [ [PLEASE PUT IN A VIDEO CASSETTE.
NV-MV21EE_GCU.book 18 ページ ２００４年３月４日 木曜日 午前９時２０分 Crystal View Control The crystal view control function ensures that you always obtain the optimum picture quality so that you get the best picture automatically. Adjusting the Playback Picture Under normal conditions, the VCR automatically adjusts the playback picture for optimum quality. However, in some cases it may be necessary to adjust it manually.
NV-MV21EE_GCU.
NV-MV21EE_GCU.
