Instruction manual (EB_EBL) ENG

12
Connecting to Satellite Receiver, Set Top Box
You can connect a Set Top Box to
receive digital broadcast by aerial
(DVB-T) signals or a satellite receiver
(digital/analogue).
Connect a 21-pin scart cable
(fully wired) to the AV 21-pin
scart socket on the VCR and
to the 21-pin scart socket
Connect a 21-pin scart cable
(fully wired) to the AV 21-pin
scart socket on the TV set
and to the 21-pin scart
socket
of
the External unit.
of the External unit.
Connect the External unit,
VCR and TV set to the AC
mains supply.
Follow the steps
described below.
2
3
5
Ensure TV Power, External
unit Power and VCR Power
are disconnected from AC
Mains socket.
1
Switch on the External unit.
Then follow page 9 for VCR
Auto Setup with RF cable.
Connect aerial to the Aerial
in connector of the External
unit.
Connect the External unit´s
Aerial out connector to the
VCR’s RF IN (Aerial input).
Connect the VCR´s RF OUT
(Aerial output) to the TV
set’s Aerial in connector.
4
4
21-pin Scart cable
21-pin Scart socket
To AC Mains socket
(AV)
External unit
VCR
TV
Aerial
AC mains lead
(supplied)
RF cable
(supplied)
4
AC mains lead
AC mains socket
1
2
3
3
3
AC mains socket
4
AC mains socket
1
1
21-pin Scart cable
2