Instruction manual (EB_EBL) ENG

Adjusting the playback picture

Under normal conditions, the VCR automatically adjusts the tracking for

optimum performance.

However, in some cases it may be necessary to adjust it manually.

If the picture contains noise bars and it is not clear to see (tracking adjustment):

If noise bars appear during normal playback or still playback, follow the

operations below.

During normal playback, press CH or until the noise bars disappear.

To return to Auto Tracking:

Press CH or simultaneously.

If the still picture jitters or jumps (V-lock adjustment):

If the still picture jitters or jumps, perform the following.

During still playback, keep the CH button or pressed until the picture

becomes stable.

With certain TV models and tapes, it may not be possible to adjust the tracking

perfectly.

If you play back a cassette that was recorded on another unit of VCR,

the picture quality may be inferior in the normal playback, slow playback,

and still playback, and it may need to manual adjust the tracking by above

method.

Also, on some TVs, the picture may scroll up and down in the special

playback functions.

However, these are not malfunctions.

Playback picture

containing noise bars

Tracking control

TRACKING/V-LOCK