Instruction manual (EB_EBL) ENG

Timer recording

The Timer recording allows you to programme the recording time of TV

programmes up to 1 month in advance. Use the on-screen menu to programme

a maximum of 16 recordings. Do not forget to verify that there is enough tape

left. The length of the recording must not exceed the tape left on the video

cassette.

Press MENU, and confirm Timer recording with ENTER

or press PROG/CHECK to display the Timer recording menu.

Press ENTER to access timer programming.

Select a station (e.g. BBC1).

Press to set date, week or weekday with (e.g. 31/12).

Press to set start- and stop-time with , (e.g. 10:30).

Hold buttons down to change time in 30-minute steps.

Press to select tape speed: A (Automatic), SP, LP, EP with .

Press to set PDC ON/OFF with .

Press ENTER to save timer programme.

Repeat these steps for further recordings you may wish to programme.

Press TIMER to activate the VCR´s timer mode.

Make sure the symbol is displayed on the VCR display.

TIMER

To cancel the Timer recording Standby Mode

When you want to use the VCR for playback or manual recording before the

programmed timer recording will be performed, you can temporarily cancel the

timer recording standby mode.

Press TIMER button. The indication on the VCR display disappears.

However, after you have finished using the VCR, remember to reactivate the

timer recording standby mode.

Press TIMER button again, otherwise the programmed timer recording will

not take place.

TIMER

Timer recording 1 / 3

Pos Date Start Stop

PDC

1 BBC1 31/12 10:30 11:30 SP ON

2 BBC2 31/12 11:30 12:30 SP ON

3 ITV 31/12 12:30 13:30 SP ON

4 CH4 31/12 13:30 14:30 SP ON

5 CH5 31/12 14:30 15:30 SP ON

-- - - - - - -/ - - - -: - - - -:- - SP - - -

:select : store

: delete : exit

ENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTERENTER

CANCEL

EXITEXITEXITEXITEXITEXITEXITEXITEXITEXITEXITEXITEXITEXITEXITEXITEXIT

PROG

/CHECK