Instruction manual (EB_EBL) ENG

ManualsBrandsPanasonic ManualsAV ProductsNVHV61EBL

Recording with VIDEO Plus+

If you do not wish to edit the Timer recording data activate timer mode

Press TIMER to activate the timer mode. The symbol appears on the VCR display.

Programming recordings with the VIDEO Plus+ function

The VIDEO Plus+ code simplifies entering programme information to record TV

and SAT programmes. The recording time may be slightly longer than the TV

programme.

Press VIDEO Plus+.

Enter the VIDEO Plus+ number ( to correct entry).

Confirm entry with ENTER. The Timer recording screen appears.

TIMER

If the device fails to recognise the TV station automatically, the [ - - ] indication

appears under the programme position (Pos).

The [ - - ] will also appear, when using VIDEO Plus+ to record from a Satellite

broadcast for the first time. For each satellite station, you will have to set the

Pos for the first time (for details see page 25).

The TV station must be entered manually with .

The VCR will store this information so it will not have to be entered again.

To edit Timer recording data press ENTER.

Select station

Use to set the date, week or day of week and use to set the start time.

Use to change the start time and use to set the stop time.

Use to change the stop time and use to set the tape speed.

Set the tape speed: A (Automatic), SP, LP, EP use to set PDC.

(for automatic setting and PDC recording see page 22)

Press ENTER to confirm the settings.

Press TIMER to activate the timer mode.

Ensure that the video recorder symbol is displayed.

and use to set date.

VIDEO Plus+ and PlusCode are registered

trademarks of Gemstar Development

Corporation. The VIDEO Plus+ system is

manufactured under license from Gemstar

Development Corporation.

To cancel the Timer recording Standby Mode see page 21.

Timer recording 1/3

Pos Date Start Stop

PDC

1 BBC1 31/12 10:30 11:30 SP ON

1 BBC1 31/12 11:30 12:30 SP ON

2 BBC2 31/12 12:30 13:30 SP OFF

- - - - - - - -/ - - - -: - - - -: - - - - - -

Video Plus+

:enter : access

0 - 9

: correct : exit

ENTER

EXIT

8 3 5 4 2 - - - -

VIDEO Plus+