Instruction manual (EB_EBL) ENG

ManualsBrandsPanasonic ManualsAV ProductsNVHV61EBL

VIDEO Plus+ Codes for Satellite Receivers / Set Top Box

This VCR is not designed to control (switch on or change channel) your

satellite receiver or Set Top Box, however, it can be taught to recognise

VIDEO Plus+ Codes for Satellite stations. The Satellite Receiver or Set Top

Box must be switched on and the correct station selected. Some receivers

have their own timer facility for this purpose. Please refer to your Satellite

Receiver/Set Top Box instructions for use of such timer facilities.

For your VCR to recognise the VIDEO Plus+ Codes for each satellite station,

you must teach your VCR which channel or AV input to record from for the

first time. Otherwise when setting a VIDEO Plus+ recording, the [- -] symbol

will appear in the channel position indicating that the VCR does not know

which channel position to set. Once you have set the channel/AV input the

VCR will remember it whenever you use a VIDEO Plus+ Code for the station

again.

Press the VIDEO Plus+ button.

Enter a VIDEO Plus+ Code from a Satellite TV Guide for a satellite channel,

e.g. Sky 1 using the Numeric buttons. Press to correct any mistakes.

Press the ENTER button. [ - - ] will appear instead of a channel number/AV input.

Press the CH button to select the channel or AV input that is to be used for

recording from the satellite channel.

Press the ENTER button to memorise the setting. The VCR will now

automatically set the programme position or AV input correctly when a VIDEO

Plus+ recording is set for this satellite station in the future.

Press to select the programme that you have just set. Now press the

CANCEL button to delete it from the timer recording list. It is no longer

needed.

Video Plus+

8 3 5 4 2 - - - -

Repeat the steps above until you have set and deleted dummy timer

recordings for each of the satellite stations that you will make VIDEO Plus+

recordings from.

Press EXIT when you have finished.

Timer recording 1/3

Pos Date Start Stop

PDC

- - - - - - 10:30 11:30 SP - - -

- - - - - - - -/ - - - -: - - - -: - - - - - -

Invalid entry

Timer recording 1 / 3

Pos Date Start Stop

PDC

AV AV 26/10 10:30 11:30 SP ON

-- --- - -- / -- - -:-- --:-- - - --

-- ---- -- / -- - -:-- --:-- - ---

-- --- - -- / -- - -:-- --:-- - - --

-- ---- -- / -- - -:-- --:-- - ---

VIDEO Plus+

Recording with VIDEO Plus+