Instruction manual (EG) ENG

REC

SV121 HV61 HV51 MV21 MV16

SP : normal recording time - optimal picture quality

LP : double recording time - simple picture quality

EP : triple recording time - reduced picture quality

When playing back LP or EP recordings, interferences may occur when

using certain types of cassettes (e.g. Type E-300). These are not

indicative of a VCR malfuncion.

Tape speed

Prior to starting the recording session, press REC MODE to set

the tape speed.

Set the TV set to the video channel and insert a cassette into the VCR;

make sure that the cassette’s protection tab is intact.

Select channel to record from.

When recording from an external device, select from

Scart inputs AV1, AV2, or the front panel input AV3.

Press REC to start recording.

Press STOP to stop recording.

Press PAUSE/SLOW to pause recording.

To protect the video heads this function will be terminated after

approx. 5 minutes.

Press PAUSE/SLOW again to resume recording.

Recording

Recordings in the S-VHS or S-VHS ET REC mode are supported

by the PAL TV system only (SV121 only, page 19).

Tape Remain counter

The display of the VCR shows:

Time - Counter - Tape Remain.

Press STATUS until [RE] is displayed.

Timer recording

Recording with INTELLIGENT TIMER

Recording with ShowView

Recording with external recording controls

Direct recording of the

VCR - TV picture.

Recording controlled by timer.

Repeating programmed

recordings.

Programming recordings using

the ShowView function.

Recording is controlled

by an external device.

Recording functions

STATUS

REC MODE