Instruction manual (EG) ENG

ManualsBrandsPanasonic ManualsAV ProductsNVMV16EG

ShowView

is a trademark of Gemstar Development

Corporation. The ShowView system is

manufactured under licence from

Gemstar Development Corporation.

ShowView

SV120 HV60 HV65 HV55 HV50 MV20

SV121 HV61 MV21 HV51 MV16

Recording with ShowView

Activating timer mode

Press TIMER to activate the timer mode.

The symbol appears on the VCR display.

Programming recordings with the ShowView function

The ShowView code simplifies entering programme information to record

TV and SAT programmes.

Press ShowView.

Enter the ShowView number ( to correct entry).

Confirm entry with ENTER.

The Timer recording screen appears.

If the device fails to recognise the TV station automatically, it must be

entered manually with . The VCR will store this information so it will

not have to be entered again.

Modifying programmed data

Press PROG/CHECK,

the Timer recording menu appears.

With select the entry to be modified, confirm with ENTER.

Select station and use to set date, week or weekday , .

Then enter start and stop time , .

Select tape speed: A (Automatic), SP, LP, EP , and confirm

with ENTER.

Press TIMER to activate the VCR’s timer mode.

ShowView

: enter : access

0 - 9

: correct : exit

ENTERENTERENTERENTERENTERENTERENTERENTER

EXITEXITEXITEXITEXITEXITEXITEXIT

8 3 5 4 2 - - - -

Timer recording 1/3

: select access

: delete : exit

ENTERENTERENTERENTERENTERENTERENTERENTER

CANCELCANCELCANCELCANCELCANCELCANCELCANCELCANCEL

EXITEXITEXITEXITEXITEXITEXITEXIT

Pos Date Start Stop

VPS

PDC

1 ARD 31/12 10:30 11:30 SP ON

1 ARD 31/12 11:30 12:30 SP ON

2 ZDF 31/12 12:30 13:30 SP OFF

- - - - - - - -/ - - - -:- - - -:- - - - - -

TIMER