Instruction manual (EG) ENG

SV121 HV61 HV51 MV21 MV16
EXT LINK
Receiver
1
2
VCR
Aerial
1 NV-SV121, NV-HV61, NV-HV51EC
2 NV-HV51EG, NV-MV21, NV-MV16
TV
!
Press MENU, the Menu screen appears.
!
With select menu Others
and confirm with ENTER.
!
With select EXT LINK and turn to
[2] or [1] .
!
Press MENU to return to the Menu screen.
EXT LINK 2: External recording control for some
satellite or digital receivers (video signal).
EXT LINK 1: For digital receivers transmitting a
special recording control signal, e.g. the F.U.N.
receiver (TU-DSF41).
D
Be sure that the timer programmes stored by your VCR do not overlap with
the ones of the satellite or digital receiver.
Recording with external
recording controls
25
Quitting recording stand-by mode
!
Press EXT LINK to quit recording stand-by mode.
The EL1 or EL2 display disappears.
You can now play back a cassette or make a manual recording. You must
press EXT LINK again to reactivate the recording stand-by mode.
!
Press EXT LINK to activate the VCR´s recording stand-by mode.
Make sure the VCR´s EL1 or EL2 display appears.
As long as the satellite or digital receiver transmits the special recording
signal (EL1), or a video picture is transmitted (EL2), the VCR will continue
to record.
!
Press ENTER to hide this message.
!
Press EXT LINK to stop recording.
Power save : OFF
VCR display : DIMMED
S-VHS REC : ON
S-VHS ET REC : OFF
EXT LINK : 2
: select
: return : exit
MENU
EXIT
Others 2 / 2
ENTER : yes EXT LINK : cancel
EXT LINK recording in progress
The following screen will be shown
if you select EXT LINK: [2]: