Operating Instructions - Language - English

SV121 HV61 HV51 MV21 MV16

General convenient functions

Auto-Start

When inserting a cassette the VCR will automatically

switch on.

Automatic stop function

To protect the video heads the device will automatically quit

the functions search backwards/forwards, quick search, still

playback and slow playback after 5-10 minutes. Interference

and motor noise are not a malfunction.

Automatic rewinding

When a cassette is played to the end, the VCR will

automatically rewind it to the beginning of the tape.

This function is not available during programmed

recording sessions.

Fast winding forward or backwards

In stop mode press or .

Press STOP to end winding.

Quick search for a beginning of a recording

While playing back or in stop-mode.

INDEX tape winds forward / INDEX tape rewinds.

Every time you press the button (max. 20 times) the

VCR will find the start of the next recording.

Playback will start automatically.

Press STOP to exit the Search function.

Search forward or backwards

While playing back press or , the search begins.

When pressing the button twice (JET SEARCH) the

search speed increases.

When holding the button down the search will run for

the duration of the button being held.

Press PLAY to end search.

Still playback

Press PAUSE/SLOW during playback.

To exit still playback press PAUSE/SLOW again or PLAY .

Slow playback (does not apply to MV21, MV16)

During playback press PAUSE/SLOW for longer than 2

seconds.

To exit slow motion playback press PLAY .

JET REW

For fast rewinding to the beginning of the tape.

On a E180 cassette approx. 43 seconds.

Tape counter and tape remain display are unavailable

during this function.

This function is not available in some cases

(e.g. at the beginning or end of the tape).