Operating Instructions

ManualsBrandsPanasonic ManualsAV ProductsNVMV22GCSGCGCU

Video Cassette Recorder

Warning and Important Information 2

Controls and Components 3

Connections 4

Tuning the TV to Your VCR 4

Storing TV Broadcasts in Your VCR 5

Language Setting of the On Screen Display 6

Setting the Clock of Your VCR 6

Settings Using the On Screen Display 7

Option Setting 8

Playback 9

Recording 10

Timer Recording 12

Search Functions 14

Before Requesting Service 16

Specifications 18

Before attempting to connect, operate or adjust this product,

please read these instructions completely.

Contents Page

Operating Instructions

Model No.

NV-MV22GCS/GC/GCU

ALSQT0880

LSQT0880_Eng.book 1 ページ２００５年２月１６日　水曜日　午後３時３６分

Summary of content (18 pages)

PAGE 1
LSQT0880_Eng.book 1 ページ２００５年２月１６日水曜日午後３時３６分 Operating Instructions Video Cassette Recorder Model No.
PAGE 2
LSQT0880_Eng.book 2 ページ２００５年２月１６日水曜日午後３時３６分 Warning and Important Information As this equipment gets hot during use, operate it in a well ventilated place; Do not install this equipment in a confined space such as a book case or similar unit. WARNING: To reduce the risk of fire, electric shock or product damage, do not expose this equipment to rain, moisture, dripping or splashing and ensure that no objects filled with liquids, such as vases, shall be placed on the equipment.
PAGE 3
LSQT0880_Eng.
PAGE 4
LSQT0880_Eng.book 4 ページ２００５年２月１６日水曜日午後３時３６分 Connections Tuning the TV to Your VCR This section shows you how to connect the VCR to an aerial, TV, etc. The VCR supplies a signal to the TV via the RF coaxial cable on channel E21-E69. If you have connected the VCR to the TV through the Audio/ Video input sockets, then you do not need to follow the procedure below. To view the pictures from the VCR, set to the AV mode on the TV with [AV] (2).
PAGE 5
LSQT0880_Eng.book 5 ページ２００５年２月１６日水曜日午後３時３６分 Storing TV Broadcasts in Your VCR The VCR is fitted with its own tuner (just like a normal TV) and can be preset to receive up to 99 TV broadcast stations. Plug in Auto Tuning When the VCR is turned on after connecting the aerial cable and the mains lead, Auto Tuning starts. AUTO TUNING IN PROGRESS, PLEASE WAIT. CH 22 SEARCH Auto Tuning Using the On Screen Display The VCR is tuned automatically by Plug in Auto Tuning.
PAGE 6
LSQT0880_Eng.book 6 ページ２００５年２月１６日水曜日午後３時３６分 Manual Tuning Procedure If the VCR is not correctly tuned by Auto Tuning, follow the procedure below. 1 Press [MENU] (9) to display the Main menu on the TV screen. 2 Press [43] (28) to select [TUNER PRESET] then press [ENTER] (26). 3 Press [43] (28) to select [CH] then select the channel number you want to tune by pressing [2 1] (28). 4 Confirm that [CLEAR] is set to [OFF].
PAGE 7
LSQT0880_Eng.book 7 ページ２００５年２月１６日水曜日午後３時３６分 Time Reset Function 1 Programme position If the clock is less than 2 minutes slow or fast, it can easily be reset to the proper time. 2 Tape running display Stop, Eject Example: Resetting the clock to 12:00 1 Press [MENU] (9) to display the Main menu on the TV screen. 2 Press [43] (28) to select [CLOCK SET] then press [ENTER] (26). 3 When the current clock displays on the VCR is between 11:58 and 12:01, press [MENU] (9) as soon as you see the 12:00.
PAGE 8
LSQT0880_Eng.book 8 ページ２００５年２月１６日水曜日午後３時３６分 OSD REC: To set the conditions for the OSD Recording function. • Press [2 1] (28) to select [ON] or [OFF]. Option Setting MENU LANGUAGE CLOCK SET TUNER PRESET SYSTEM OPTION TAPE REFRESH NAVI MEMORY 0PROG. SELECT : , ENTER END :MENU OPTION TAPE SELECT [AUTO] NTSC INPUT SELECT [AUTO] NTSC PB SELECT [onPALTV] JET NAVIGATOR [OFF] DELETE NAVIDATA [NO] OSD REC [OFF] OSD [AUTO] SELECT: OFF: ON: Initially set at this position.
PAGE 9
LSQT0880_Eng.book 9 ページ２００５年２月１６日水曜日午後３時３６分 To Play Back a Recorded Part Repeatedly Playback Preparations • Confirm that the VCR is on. • Confirm that the TV is on and the VCR viewing channel is selected. • Insert a recorded video cassette. Press [REPEAT] (30). • Press [STATUS/ NAVI CHECK] (32) and the [R1] indication appears on screen display. (See page 7.) • A recorded part on the tape must be at least 15 minutes long.
PAGE 10
LSQT0880_Eng.book 10 ページ２００５年２月１６日水曜日午後３時３６分 Recording Preparations • Confirm that the VCR is on. • Confirm that the TV is on and the VCR viewing channel is selected. Operations 1 Insert a video cassette with an intact erasure prevention tab. • If it has already been inserted, press [VCR-ON/OFF] (1) to turn the VCR on. 2 Select the TV station using [CH] (20). • It is also possible to select by pressing [Numeric] (3). 3 Press [REC] (15) ([REC/ OTR] (37)) to start recording.
PAGE 11
LSQT0880_Eng.book 11 ページ２００５年２月１６日水曜日午後３時３６分 To Select the Recording Duration and Perform Timer Recording (OTR Recording) Operations 1 Press [PLAY] (8) to start playback. OTR means One-Touch Recording and is called this way, because you can start recording and select the recording duration by repeatedly pressing a single button. This is very convenient, for example when you want to start recording immediately but need to go out or want to go to bed.
PAGE 12
LSQT0880_Eng.book 12 ページ２００５年２月１６日水曜日午後３時３６分 Timer Recording Easy Timer Programming Up to 16 timer programmes, including weekly and daily programmes, can be recorded up to one month in advance by setting the timer. Preparations • The VCR must be turned on, or in timer recording standby mode. • Confirm that the TV is on and the VCR viewing channel is selected. • Insert a video cassette with an intact erasure prevention tab. • Check that the clock is set to the correct time.
PAGE 13
LSQT0880_Eng.book 13 ページ２００５年２月１６日水曜日午後３時３６分 Programming a Timer Recording of a TV Programme Until its End (Rec Mode Auto Change Function) If the VCR determines that the remaining tape time is insufficient to record the programme to its end during a timer recording performed in the SP mode, this function automatically changes the Rec Mode to ensure that the whole programme will be recorded.
PAGE 14
LSQT0880_Eng.book 14 ページ２００５年２月１６日水曜日午後３時３６分 To Set the Category Search Functions Jet Navigator This VCR can display a list of the recorded programmes on the inserted video cassette on the TV screen. You can then select the desired programme, and the VCR will quickly locate its beginning and start playback. Conditions for correct operation of the Jet Navigator function: • The tape length of the inserted cassette must be set correctly. (See page 8.
PAGE 15
LSQT0880_Eng.book 15 ページ２００５年２月１６日水曜日午後３時３６分 Confirming the cassette which includes a programme you want to watch (Jet Navigator Memory) This allows you to search the cassette which you recorded the programme you want to watch without inserting video cassette tapes. Index signals are automatically recorded in the following cases: • When you start a recording by pressing [REC] (15) or [REC/ OTR] (37). • When a timer recording starts. • When you press [REC] (15) on the remote control during recording.
PAGE 16
LSQT0880_Eng.book 16 ページ２００５年２月１６日水曜日午後３時３６分 Before Requesting Service Message of On Screen Display The error message is indicated in brackets [ ]. [PLEASE PUT IN A VIDEO CASSETTE.] • [REC/OTR] (37) ([REC] (15)) or [TIMER (REC)] (14) has been pressed without a video cassette inserted. #Insert a video cassette. [PLEASE STOP THE TAPE.] • [TUNER PRESET] has been selected during playback. #Stop the tape. [PLEASE SET THE CLOCK.
PAGE 17
LSQT0880_Eng.book 17 ページ２００５年２月１６日水曜日午後３時３６分 Crystal View Control The crystal view control function ensures that you always obtain the optimum picture quality so that you get the best picture automatically. Adjusting the Playback Picture Under normal conditions, the VCR automatically adjusts the playback picture for optimum quality. However, in some cases it may be necessary to adjust it manually.
PAGE 18
LSQT0880_Eng.