Instruction Manual (EG) EN

DVD

VCR

Timer recording

TIMER

PROG/CHECK

TIMER CHECK

Press PROG/CHECK to select an available memory location .

Press ENTER to confirm

First select the respective station , then use to set date, week or day of week .

Enter start and stop time ,

Keep the buttons pressed to change the time in 30-minute steps.

Set the tape speed: A (Automatic), SP, LP, EP ,

Press or the VPS/PDC button to change the VPS/PDC setting

Press ENTER to save the timer programme.

Repeat these steps for further recordings you may wish to programme.

Press TIMER to activate the recorder's timer mode.

Ensure that the VCR symbol is displayed.

Do not forget to verify that there is enough tape remain. The length of the

recording must not exceed the time remain on the video cassette.

Quitting the timer mode

you entered previously.

Press TIMER, the VCR symbol turns off.

You can now play back a cassette or make a manual recording.

Press TIMER again to reactivate the timer programme

Displays the timer programmes for verifications (button on the unit only)

Repeatedly press the button to view the details of the timer programmes on the VCR

display.

The Timer recording allows you to programme the recording time of TV programmes up

to 1 month in advance. Use the on-screen menu to programme a maximum of 16

recordings.

Pos Date Start Stop

VPS

PDC

1 ARD 31/12 10:30 11:30 SP ON

1 ARD 31/12 11:30 12:30 SP ON

2 ZDF 31/12 12:30 13:30 SP ON

4 RTL 31/12 13:30 14:30 SP ON

6 VOX 31/12 14:30 15:30 SP ON

- - - - - - - -/- - - - : - - - - :- - SP - - -

:select :store

: delete : exit

ENTERENTERENTERENTERENTERENTERENTERENTER

CANCELCANCELCANCELCANCELCANCELCANCELCANCELCANCEL

EXITEXITEXITEXITEXITEXITEXITEXIT

Timer recording 1 / 3