Instruction Manual (EG) EN

VCR DVD
ShowView
DVD
TV
VCR
ShowView
TIMER
D
ShowView is a trademark of Gemstar Development Corporation. The ShowView system
is manufactured under licence from Gemstar Development Corporation.
Activate the Timer recording function
!
Press TIMER to activate the timer mode.
The symbol appears on the VCR display.
The Timer recording screen is displayed.
Using ShowView for timer programming
With the ShowView code you can easily programme TV and SAT station recordings.
!
Press the ShowView button
!
Enter the ShowView number (press to correct any mistakes)
!
ENTER confirms your entry.
If the unit fails to automatically detect the station press .
The video recorder will store the information so that you will not have to enter it again
later
.
Editing a programme
!
Press ENTER to alter the timer data.
!
Select a station ,
!
Set the date, week or day of week ,
!
Enter the start time: ,
!
Enter the stop time : ,
!
Set the tape speed: A (Automatic), SP, LP, EP ,
Press or the VPS/PDC button to change the VPS/PDC setting
!
Press ENTER to store a change.
!
Press TIMER to activate the timer mode.
The symbol appears on the VCR display.
15
ShowView
: enter : access
0 - 9
: correct : exit
ENTERENTERENTERENTERENTERENTERENTERENTER
EXITEXITEXITEXITEXITEXITEXITEXIT
8 3 5 4 2 - - - -
Timer recording 1/3
:select access
:
: delete : exit
ENTERENTERENTERENTERENTERENTERENTERENTER
CANCELCANCELCANCELCANCELCANCELCANCELCANCELCANCEL
EXITEXITEXITEXITEXITEXITEXITEXIT
Pos Date Start Stop
VPS
PDC
1 ARD 31/12 10:30 11:30 SP ON
1 ARD 31/12 11:30 12:30 SP ON
2 ZDF 31/12 12:30 13:30 SP OFF
- - - - - - - -/ - - - -:- - - -:- - - - - -
- - - - - - - -/ - - - -:- - - -:- - - - - -
- - - - - - - -/ - - - -:- - - -:- - - - - -