Instruction Manual (EG) EN

DVD
TV
VCR
EXT LINK
RF IN
RF OUT
AV 1
AV 2
VCR / DVD
Receiver
Aerial
21-pin scart cable
16
External recording control
!
Press the EXT LINK button to activate the VCR's recording standby mode. As long
as the Video- or Controlsignal is being transmitted by the Satellite or Digital
Receiver, the VCR will record.
The following screen will be shown
if you selected EXT LINK 2:
D
Be sure that the timer programmes stored by your VCR do not overlap the ones of
the satellite or digital receiver.
D
Some external equipment may not work with this function, refer to the operating
instructions for the external unit.
!
!
Press ENTER to hide the message.
Press the EXT LINK button to stop recording.
ENTER : yes EXT LINK :cancel
EXT LINK recording in progress.
The AV2 input of this VCR is equipped for future use with external equipment having
external timer recording control such as digital satellite receivers. The AV2 input can
be set to EXT LINK 1 or EXT LINK 2 depending on the equipment to be connected.
Fully wired 21-pin scart cable is required. Refer also to the manufacturer’s instruction
for the external unit.
EXT LINK 2: The VCR will start recording when AV2 input detects the video
signal and stop recording when the video signal is switched off by
the external unit.
EXT LINK 1: The VCR recording start and stop time is controlled by a control
signal sent via the 21-pin scart cable from the external unit, e.g. the
F.U.N. receiver (TU-DSF31).
External recording control
!
Press MENU and select Others
!
Press ENTER
!
Select EXT LINK 2 or 1
!
Press MENU to return to the Menu screen.
Others 2 / 2
: select
: return : exit
MENUMENUMENUMENUMENUMENUMENUMENU
EXITEXITEXITEXITEXITEXITEXITEXIT
Remote : VCR 1
EXT LINK : 2