Instruction Manual (EG) EN

DVD
TV
VCR
Position memorized
Position cleared
DVD-V
WMA
WMA
RAM
WMA
WMA
JPEG
VCD CD
MP3
WMA
DVD-A
WMA
WMA
g
Hi hMAT
DVD-V
RAM VCD
DVD-A
DVD-V
WMA
WMA
RAM
WMA
WMA
JPEG
VCD CD
MP3
WMA
DVD-A
WMA
WMA
g
Hi hMAT
Playback
!
OPEN/CLOSE opens the disc tray.
!
Place the disc on the disc tray.
!
PLAY closes the disc tray and automatically starts playing back the disc.
The player may take some time to read all of the disc information!
D
MP3, WMA, CD-Text : outputs some track information to the TV screen.
!
SUBTITLE to display/quit the track information on TV screen.
26
To pause playback
!
PAUSE during playback.
!
PLAY resumes playback.
Frame-by-frame
In pause mode, press remote control buttons . Every push of one of these buttons
takes the film a single frame forwards or backwards. Keeping one of these buttons
pressed continuously displays the next single frame in the chosen direction.
You can also use button to move the film forward a single frame at a time.
D
VCDs do not support a backward motion by single frames.
POSITION MEMORY
Using the Position Memory function playback will be resumed at a stored position.
The position tag is retained when you change discs or when the unit goes into standby
mode. You can tag and directly access up to 5 discs. This function is available only if
the elapsed playback time is displayed when playing the disc.
General playback
The label
must face
up.
!
POSITION MEMORY during playback.
!
The "Position memorized" box will be displayed.
!
You can now press to go into standby mode or change discs.
!
PLAY to replay the disc again. Playback will be resumed at the stored position
and the position tag will be cleared.
D
Some discs do not fully support all of this function.
To stop playback
!
STOP twice one after the other.
See page 7 "Resume function"