Instruction Manual (EG) EN

SETUP-menu Video

VCR DVD

DVD

VCR

SETUP

ENTER

RETURN

TAB

SELECT

TV Aspect

AV1 Output

Still Mode

NTSC Disc Output

4:3 Pan&Scan

Video

Automatic

PAL 60

Video

AV1 Output:

Please check which setting is supported by your TV set.

Please refer to the operating instructions of your TV set.

Video: Standard picture quality

RGB: Set RGB for best picture quality at DVD playback.

NTSC Disc Output:

To play a NTSC disc, select a TV standard (NTSC/PAL60) that matches the

function of your TV set.

Please refer to the operating instructions of your TV set.

Still Mode:

Every picture frame is made up of two fields which are output to the screen one

after the other.

Automatic: The unit automatically selects the optically better type of image.

Field: Poorer quality than a frame-based image; however, the image is less fuzzy.

Frame: Both fields of a picture alternate on the screen. Although the image may be

somewhat fuzzy, its quality is better than that of a field-based still image.

TV Aspect :

The format of TV screens is either 4:3 (standard) or 16:9 (wide-screen).

Choose the 16:9 format if your player is attached to a wide-screen TV set.

If it is attached to a standard TV screen you can choose either 4:3 Pan&Scan

or 4:3 Letterbox (see illustration):

Pan&Scan:

Automatically crops a 16:9 picture and turns it into an optimum 4:3

picture producing neither black bars nor distortions.

This format is not supported by all DVDs.

Letterbox:

Black bars will appear at the top and bottom edge of the screen to

allow the reproduction of wide-screen video material on a standard

TV screen.