user manual

Setting the Personal Identification Number (PIN) for PS Registration
To prevent registering
the PS to a wrong PBX, a PIN for PS registration can be set to the PBX. Before registering
the PS to the PBX, enter the PIN set to the PBX into the PS. By doing so, the PS will only be registered to the
PBX with the matching PIN.
Note
• By default, the PIN for PS registration is "1234" for both the PBX and PS. Therefore, the PS can be
registered to the PBX without setting the PIN.
• The PIN for PS registration will only be used when registering the PS to the PBX.
Therefore, during normal operation after registration, even if there is more than 1 PBX with the same
PIN near the PS, the PS will not be inadvertently linked to a different PBX.
Setting the PIN for PBX
[692]
4 digits
PIN for PS Registration
END
(HOLD)
ENTER ENTER
1234
Setting the PIN for PS
Using the KX-TD7684/KX-TD7694
Select
"Change PIN"
1 to 8 digits
1234
C.Tone
PIN for PS Registration
Using the KX-TD7680
Select
"CHANGE PIN"
C.Tone
1 to 4 digits
1234
PIN for PS Registration
Using the KX-TD7690
Select
"CHANGE PIN"
S1
ENTR
S1
SEL
C.Tone
1 to 4 digits
1234
PIN for PS Registration
204 Installation Manual
2.9.7 Connecting a Cell Station to the PBX