Digital Camera Operating Instructions PV-SD4090

27
Basic Operation
REC
OFF
PLAY
PC
MANUAL
REC
VOL +
VOL -
-
+
1Press or to select BEEP and
Press
or to select one of the three
settings shown below.
OFF : Select to turn OFF the beep sound.
LOW : Select to hear a low beep sound.
HIGH : Select to hear a loud beep sound.
2Press MENU to exit.
Digital Camera will beep:
• Once when the BEEP is set to LOW or
HIGH in the MENU mode as follows.
When you press the REC MODE, MENU
or FLASH buttons.
When you press the , , , or
buttons while adjusting Brightness, Iris
and Volume.
When you press the
or button while
adjusting Brightness, Iris and volume.
• Twice when you press the shutter button
half way to adjust the focus.
<REC mode> <MANUAL REC mode>
<PLAY mode>
Set the POWER Switch to REC, MANUAL
REC or PLAY. (See pages 19~20.) Press
MENU to display the MENU screen.
Before you begin
Note
• You can select BEEP mode in the REC,
MANUAL REC and PLAY mode.
• If you change the setting, repeat step 2.
Capturing Images
<MANUAL REC MENU 3/3>
BEEP
SEL : SET :
EXIT : MENU
LOW
<REC MENU 2/2>
BEEP
SEL : SET :
EXIT : MENU
LOW
<PLAY MENU 2/2>
SLIDE SHOW
OSD
BRIGHTNESS
CLOCK SET
BEEP
SEL : SET :
EXIT : MENU
ON
LOW
Set Digital Camera to beep (low or high
volume), when an image is captured, or
set to OFF.
Beep
2
1
SD4090.p22-33.p65 99/11/11, 16:3927