Operation Manual

Accessories / Options
7
Quick Start Guide
Attaching the pedestal
To help avoid risk of damage or injury by the TV tipping or falling, please follow the warnings and
cautions below:
Warning
•
Do not disassemble or modify the pedestal.
Caution
•
Do not use any pedestal other than the one provided with this TV.
•
Do not use the pedestal if it becomes warped or physically damaged. If this occurs, contact your
nearest Panasonic dealer immediately.
•
During setup, make sure that all screws are securely tightened.
•
Ensure that the TV does not suffer any impact during installation of the pedestal.
•
Ensure that children do not climb onto the pedestal.
•
Install or remove the TV from the pedestal with at least two people.
A
Assembly screw (4)
(silver)
•
XYN5+F20FN
M5 × 20
C
Assembly screw
(black)
•
XSB4+8FNK
M4 × 8
E
Base
•
TBL5ZX0065
(TX-P42G30B)
•
TBL5ZX0069
(TX-P50G30B)
B
Assembly screw (4)
D
Pole
F
Cover
(black)
•
THEL087N
(TX-P42G30B)
•
THEL088N
(TX-P50G30B)
M5 × 25
•
TBL5ZA3055
(TX-P42G30B)
•
TBL5ZA3065
(TX-P50G30B)
•
TBL5ZB3094-1
(TX-P42G30B)
•
TBL5ZB3095-1
(TX-P50G30B)
1
Assembling the pedestal
Use the assembly screws
A
to fasten the pole
D
to the base
E
securely.
•
Make sure that the screws are securely tightened.
•
Forcing the assembly screws the wrong way
will strip the threads.
2
Securing the TV
Use the assembly screws
B
to fasten securely.
•
Tighten the four assembly screws loosely at first,
then tighten them firmly to fix securely.
•
Carry out the work on a horizontal and level surface.
B
E
Hole for pedestal
installation
(View from the bottom)
Arrow mark
A
E
D
Front
Attach the cover
F
with assembly screw
C
F
C
Removing the pedestal from the TV
Be sure to remove the pedestal in the following way
when using the wall-hanging bracket or repacking the TV.
1 Remove the assembly screws
B
from the TV.
2 Pull out the pedestal from the TV.
3 Remove the assembly screw
C
from the cover.
4 Pull out the cover.
5 Remove the assembly screws
A
from the pole.
Adjusting the panel to your desired angle
•
Do not place any objects within the full rotation range.
(View from the top)
: 15°
(TX-P42G30B)
: 10°
(TX-P50G30B)