Datasheet

ManualsBrandsPANASONIC ManualsTime Switches & Multifunction RelaysTime Delay Relay, Timer, 2 voltage-free changeover contacts 100 - 240 Vac IP50

DIN48 SIZE

MULTI-RANGE ANALOG TIMER

PM4H-A

PM4H-S

PM4H-M

FEATURES

• Front panel of IP65 type is protected against water-splash and dust

• 100-240V AC free-voltage input, 48-125V DC type available

• Built-in Screw terminals

• Screw terminal type is used for easy wiring and reducing additional cost for

accessories.

• 8 different operation modes: (PM4H-A)

• Tube base with pin style terminals

• Multiple time ranges — 1 s to 500 h (Max.)

• Short body — 62.5mm 2.461 inch (screw terminal type)

1.890

62.5

2.461

mm inch

Socket

mount

Flush mount

PRODUCT TYPE

Type

PM4H-S

PM4H-M

PM4H-A

Operation mode

Contact

arrangement

Time range

Rated

operating voltage

Protective

construction

Terminal type Part No.

PM4HA-H-AC240VW

PM4HA-H-AC240VSW

PM4HA-H-24VW

PM4HA-H-24VSW

PM4HA-H-DC12VW

PM4HA-H-DC12VSW

PM4HA-H-AC240V

PM4HA-H-AC240VS

PM4HA-H-24V

PM4HA-H-24VS

PM4HA-H-DC12V

PM4HA-H-DC12VS

PM4HS-H-AC240VW

PM4HS-H-AC240VSW

PM4HS-H-24VW

PM4HS-H-24VSW

PM4HS-H-DC12VW

PM4HS-H-DC12VSW

PM4HS-H-AC240V

PM4HS-H-AC240VS

PM4HS-H-24V

PM4HS-H-24VS

PM4HS-H-DC12V

PM4HS-H-DC12VS

PM4HM-H-AC240VW

PM4HM-H-AC240VSW

PM4HM-H-24VW

PM4HM-H-24VSW

PM4HM-H-DC12VW

PM4HM-H-DC12VSW

PM4HM-H-AC240V

PM4HM-H-AC240VS

PM4HM-H-24V

PM4HM-H-24VS

PM4HM-H-DC12V

PM4HM-H-DC12VS

16 selectable

ranges

1s to 500h

Relay

Timed-out

1 Form C

Instantaneous

1 Form C

Relay

Timed-out

2 Form C

Relay

Timed-out

2 Form C

8 operation modes

• Pulse ON-delay

• Pulse Flicker

• Pulse ON-flicker

• Differential ON/OFF-delay (1) (2)

• Signal OFF-delay

• Pulse One-shot

• Pulse One-cycle

Power ON-delay

5 operation modes

(With instantaneous contact)

• Power ON-delay

• Power Flicker

• Power ON-flicker

• Power One-shot

• Power One-cycle

11 pin

Screw terminal

11 pin

Screw terminal

11 pin

Screw terminal

11 pin

Screw terminal

11 pin

Screw terminal

11 pin

Screw terminal

8 pin

Screw terminal

8 pin

Screw terminal

8 pin

Screw terminal

8 pin

Screw terminal

8 pin

Screw terminal

8 pin

Screw terminal

8 pin

Screw terminal

8 pin

Screw terminal

8 pin

Screw terminal

8 pin

Screw terminal

8 pin

Screw terminal

8 pin

Screw terminal

100 to 240V AC

24V AC/DC

12V DC

100 to 240V AC

24V AC/DC

12V DC

100 to 240V AC

24V AC/DC

12V DC

100 to 240V AC

24V AC/DC

12V DC

100 to 240V AC

24V AC/DC

12V DC

100 to 240V AC

24V AC/DC

12V DC

IP65

IP50

IP65

IP50

IP65

IP50

PM4H-A/PM4H-S/PM4H-M

All types of PM4H timer have multi-time

range.

16 time ranges are selectable.

1s to 500h (Max. range) is controlled.

TIME RANGE

Scale

Time unit

0.1s to 1s

sec min hrs 10h

0.1 min to 1 min 0.1h to 1h 1.0h to 10h

5 0.5s to 5s

Control

time range

0.5 min to 5 min 0.5h to 5h 5h to 50h

10 1.0s to 10s 1.0 min to 10 min 1.0h to 10h 10h to 100h

50 5s to 50s 5 min to 50 min 5h to 50h 50h to 500h

Note: 0 setting is for instantaneous output operation.

If you use this timer under harsh environment, please order above sealed type (IP65 type). IP65 type — Protection dust and water jet splay on the front face.

When ordering CE type, please order the Part No. with suffix CE. (e.g. PM4HA-H-AC240VWCE

)

UL File No.: E122222 CSA File No.: LR39291

PM4H-A/S/M

02/2003

Summary of content (14 pages)

PAGE 1
PM4H-A/S/M PM4H-A PM4H-S PM4H-M DIN48 SIZE MULTI-RANGE ANALOG TIMER UL File No.: E122222 CSA File No.: LR39291 FEATURES 48 1.890 62.5 2.461 48 1.890 Socket mount mm inch Flush mount • Front panel of IP65 type is protected against water-splash and dust • 100-240V AC free-voltage input, 48-125V DC type available • Built-in Screw terminals • Screw terminal type is used for easy wiring and reducing additional cost for accessories.
PAGE 2
PM4H-A/S/M CHARACTERISTICS Type Item PM4H-A Rated operating voltage Rated frequency Rated power consumption Output rating PM4H-S 100 to 240V AC, 12V DC, 24V AC/DC, 48 to 125V DC 50/60Hz common (AC operating type) Approx. 10VA (100 to 240V AC) Approx. 2.5VA (24V AC) Approx.
PAGE 3
PM4H-A/S/M PARTS NAME PM4H-S PM4H-A PM4H-M Power indicator LED Operation indicator LED Hand Time indicator window Set dial Time range indicator Operation mode indicator Time range selector 16 time settings selectable 1 s to 500 h Instantaneous output area 1s 5s 10s 50s 1min 5min 10min 50min When the hand is in this area, instantaneous operation starts.
PAGE 4
PM4H-A/S/M OPERATION MODE PM4H-A Operation mode Pulse ON-delay ON The new settings are valid after power OFF ON  LED lighting LED flickering  T: Setting time t1, t2, ta, tb
PAGE 5
PM4H-A/S/M Operation mode Pulse One-shot OS Operation Time chart Turn the operation selector to OS . Power is applied continuously. When a start signal is applied, the output contacts change state immediately and time cycle begins. When the time delay is completed, the output contacts return to their normal state. The contacts will return to normal state when a reset signal is applied or power is removed. (Note: When a stop signal is applied during timing operation, the time cycle stops.
PAGE 6
PM4H-SD/SDM DIN48 SIZE ANALOG STAR ( )-DELTA ( ) TIMERS UL File No.: E122222 CSA File No.: LR39291 PM4H-SD/SDM FEATURES • Select four types of time ranges between 0.2 s and 100 s on a single unit. • Select between five types of time ranges between 0.04 s and 0.7 s for the switching times. • There is a - switching indicator so you can check the operation at a glance. • The AC free power supply and shorter body make it easier to use. - 48 1.890 mm inch 48 1.890 66.5 2.
PAGE 7
PM4H-SD/SDM PRODUCT TYPE Operation mode Type PM4H-SD Star ( )-Delta ( ) switching Contact arrangement Protective Rated operating construction voltage Time range Terminal type 8 pin screw 8 pin screw 8 pin screw 8 pin screw 8 pin screw 8 pin screw 8 pin screw 8 pin screw 100 to 240V AC Relay Timed-out side: 1 Form A side: 1 Form A 24V AC IP65 PM4H-SDM Star ( )-Delta ( ) switching (Instantaneous contact) Star ( )Delta ( ) switching PM4H-SD Star ( )-Delta ( ) switching Relay Timed-out side: 1 For
PAGE 8
PM4H-F DIN48 SIZE ANALOG MULTIRANGE POWER OFF-DELAY TIMERS UL File No.: E122222 CSA File No.: LR39291 PM4H-F FEATURES • Switch operation times between three types of time ranges of 1 s to 10 s and 1 min to 10 min. • Instantaneous reset available. • The shorter body makes it easier to use. 48 1.890 mm inch 48 1.890 62.5 2.
PAGE 9
PM4H-F PRODUCT TYPE Type Operation mode Contact arrangement Time range 3 selectable ranges over 1s to 10s 3 selectable ranges over 1 min to 10 min PM4H-F8 Power OFF-delay (without reset) Relay Timed-out 2 Form C 3 selectable time ranges over 1s to 10s 3 selectable time ranges over 1 min to 10 min 3 selectable time ranges over 1s to 10s PM4H-F8R Power OFF-delay (with instantaneous reset) 3 selectable time ranges over 1 min to 10 min Relay Timed-out 1 Form C 3 selectable time ranges over 1s to 10s
PAGE 10
PM4H-F Type Operation mode Contact arrangement Protective Rated operating construction voltage Time range 100 to 120V AC 200 to 240V AC IP65 24V AC 12V DC 24V DC 3 selectable time ranges over 1s to 10s 100 to 120V AC 200 to 240V AC IP50 24V AC 12V DC PM4H-F11R Power OFF-delay (with instantaneous reset) 24V DC Relay Timed-out 2 Form C 100 to 120V AC 200 to 240V AC IP65 24V AC 12V DC 24V DC 3 selectable time ranges over 1 min to 10 min 100 to 120V AC 200 to 240V AC IP50 24V AC 12V DC 24V DC
PAGE 11
PM4H-F WIRING DIAGRAMS • PM4H-F8 (no reset input) Pin type Time-delay 2C N.C. • PM4H-F8R (with reset input) Pin type Time-delay 1C, with reset input N.O. N.C. N.O. • PM4H-F11R (with reset input) Pin type Time-delay 2C, with reset input N.C. Reset input N.O. N.O. Reset input N.C. N.C. N.O. COM (–) COM Operating voltage COM (+) (–) Operating voltage COM (+) COM (–) Operating (+) voltage Screw terminal type Time-delay 2C, with reset input COM N.O. COM N.C. N.C.
PAGE 12
Notes for PM4H series MODES & TIME SETTING 1) Operation mode setting [PM4H-A] 8 operation modes are selectable with operation mode selector. Turn the operation mode selector with screw driver. Operation mode is shown up through the window above the mode selector. The marks are ON , FL , FO , OF1 , SF , OS , OF2 , OC . Turn the mode selector to the mark until you can check by clicking sound. Confirm the mode selector position if it is correct. If the position is not stable, the timer might mis-operate.
PAGE 13
Notes for PM4H series CAUTIONS 1. Terminal connections 1) Refer to wiring diagram before terminal connections. 2) Use the screw terminal type for flush mounting. For using 8 pin type, use the timer with screw terminal socket (AT8-RR) or 8 pin cap (AD8-RC). For using 11 pin type, use the timer with 11 pin cap (AT8-DP11). Do not solder directly the pin of the timer for connection. 3) The connection to power supply 2. Input connections 1) If the circuits is connected as in Fig.
PAGE 14
Notes for PM4H series Apply the open-collector connection. The characteristics of the transistor used must be VCEO=10V or more, IC=10mA or more, and ICBO=6µA or less. Additionally, the input impedance must be 1kΩ or less, and the residual voltage must be 0.6V or less. 3) Voltage input 1mA Internal circuit with photoelectric sensor, etc. (The signal input is turned on at L level.