Operation Manual
ENGLISH -
21
Getting Started
Setting up
Projection method
You can use the projector with any of the following 6 projection methods. To set the desired method in the projector.
J
Mounting on the ceiling
and projecting forward
Mounting on the ceiling
J
and projecting from rear
(Using translucent screen)
Vertical projecting
J
upwards
(Using translucent screen)
Setting on a desk/oor
J
and projecting from
forward
J
Setting on a desk/oor
and projecting rear
(Using translucent screen)
Vertical projecting
J
downwards
Attention
For optimum viewing quality, install the projector in a location where screen exposure to outside light, light from light xtures
z
or other light is at a minimum. Also draw the curtains, close blinds and turn off light xtures.
Do not roll the projector more than 10 degrees from side to side.
z
Do not roll the projector more than 5 degrees from side to side
z
when front or rear is downward.
5˚
5˚
5˚
5˚
10˚
10˚
Parts for ceiling or wall mount (Optional)
You can install the projector on the ceiling or wall by using the optional ceiling mount bracket (ET-PKV100H:
for high ceiling, ET-PKV100S: for low ceiling), the optional projector mount base ET-PKC100B, and Wall Mount
Bracket ET-PKC100W.
Use only the ceiling mount brackets or Wall Mount Bracket specied for this projector.
z
Refer to the installation manual for the ceiling mount bracket or
z
Wall Mount Bracket
when you install the bracket or
hanger and the projector.
Attention
To ensure projector performance and security, installation of the ceiling mount bracket
z
or
Wall Mount Bracket
must be carried by your dealer or a qualied technician.