Operation Manual

Setting up

- ENGLISH

Getting Started

Screen size and throw distance

Place the projector referring to the diagram on the right

and the gures of throwing distance. You can adjust

the display size.

L Projection distance (cm)

SH Height of the projection area (m)

SW Width of the projection area (m)

SD Diagonal length of the projection area (m)

Height from bottom of projector to bottom

of screen (cm)

Attention

Before installing, please read “Precautions for Use” (

pages 12 to 16).

Special care should be used when DLP projectors are used in the same room as high power laser equipment. Direct or

indirect hitting of a laser beam on to the lens can severely damage the DMD element in which case there is a loss of

warranty.

Note

When projecting to wall or at objects, even slight warpage or irregularities of the screen may have an effect on the quality

of the projected images.

Projection distance for PT-CW230EA

(All measurements below are approximate and may differ slightly from the actual measurements.)

Projection size For 4:3 aspect ratio For 16:9 aspect ratio For 16:10 aspect ratio

Screen diagonal (SD) L A L A L A

1.40 m(55") 24.0 cm(0.79') 22.9 cm(0.75') - - - -

1.52 m(60") 26.5 cm(0.87') 24.1 cm(0.79') 23.7 cm(0.78') 27.0 cm(0.89') 23.0 cm(0.75') 22.5 cm(0.74')

1.78 m(70") 31.6 cm(1.04') 26.4 cm(0.87') 28.4 cm(0.93') 29.7 cm(0.97') 27.5 cm(0.90') 24.5 cm(0.80')

2.03 m(80") 36.7 cm(1.20') 28.6 cm(0.94') 33.0 cm(1.08') 32.5 cm(1.07') 32.0 cm(1.05') 26.5 cm(0.87')

2.29 m(90") 41.8 cm(1.37') 30.9 cm(1.01') 37.6 cm(1.23') 35.3 cm(1.16') 36.5 cm(1.02') 28.5 cm(0.94')

2.54 m(100") - - 42.2 cm(1.39') 38.0 cm(1.25') 41.0 cm(1.35') 30.5 cm(1.00')

2.79 m(110") - - - - 45.5 cm(1.49') 32.5 cm(1.07')

* Install the projector where the projection distance should be within 23.0 cm and 45.5 cm in order to keep the

lens performance.

Any other projection distance can be obtained according to the screen dimensions (m) using the following

calculations.

The distance is shown in units of meters. (The calculated distance may contain a certain error.)

If the screen dimensions are written as “SD",

For 4:3 aspect ratio For 16:9 aspect ratio For 16:10 aspect ratio

Screen height (SH) = SD(m) × 0.6 = SD(m) × 0.490 = SD(m) × 0.530

Screen width (SW) = SD(m) × 0.8 = SD(m) × 0.872 = SD(m) × 0.848

Projection distance (L) = 0.200425 × SD(m) - 0.039967 = 0.18196 × SD(m) - 0.039967 = 0.1770 × SD(m) - 0.039967

Screen