Operation Manual

Setting up
24
- ENGLISH
Getting Started
Adjusting front adjustable feet
Lift the front of the projector and rotate the adjustable feet to a proper height and tilt.
You can turn the front adjustable feet to extend them. You can turn them in the opposite direction to contract
them.
(You can adjust the projection angle vertically.)
Attention
Heated air comes out of the air exhaust port while the lamp is lit. Do not touch the air exhaust port directly when you adjust
z
the front adjustable feet.
If keystone distortion occurs on the projected image, perform “KEYSTONE” from the “Screen” menu. (
z
Æ
page 50)
Note
Screw up the adjustable feet, and an audible click will be heard as the limit.
z
Adjustable range: 1.0 degree