Brochure

Keystone correction range
Keystone correction range when using the
optional upgrade kit ET-UK20*
3
Installation
Terminals SDI IN 1
SDI IN 2
HDMI IN
DVI-D IN
RGB 1 IN
R, G, B
Y, P
B, PR (Y, CB, CR)
S-Video signal
RGB 2 IN
R, G, B
Y, PB
, P
R
(Y, C
B
, C
R
)
3D SYNC 1 IN/OUT
3D SYNC 2 OUT
SERIAL IN
SERIAL OUT
REMOTE 1 IN
REMOTE 1 OUT
Vertical ± 40°, horizontal ± 15°
(vertical ±22° and horizontal ±15° with the ET-D75LE50,
vertical ±28° and horizontal ±15° with the ET-D75LE6,
Curved correction range
Vertical ±20°, horizontal ±15°
(vertical ±8° and horizontal ±8° with the ET-D75LE5/50,
vertical ±10° and horizontal ±10° with the ET-D75LE6)
vertical +5° and horizontal ±15° with the ET-D75LE90)
Vertical ±45°, horizontal ±40°
(vertical ±40° and horizontal ±40° with the ET-D75LE1/2/10/20,
vertical ±28° and horizontal ±15° with the ET-D75LE6,
vertical ±22° and horizontal ±15° with the ET-D75LE5/50)
Ceiling/oor, front/rear
BNC ×1,
Dual-link HD-SDI signal: SMPTE ST 372 compliant (Link-A)
3G-SDI signal: SMPTE ST 424 compliant
HD-SDI signal: SMPTE ST 292 compliant
SD-SDI signal: SMPTE ST 259 compliant
BNC ×1,
Dual-link HD-SDI signal: SMPTE ST 372 compliant (Link-B)
HD-SDI signal: SMPTE ST 292 compliant
SD-SDI signal: SMPTE ST 259 compliant
HDMI 19-pin ×1, Deep Color, compatible with HDCP
DVI-D 24-pin ×1, DVI 1.0 compliant, HDCP compatible,
for single link only
BNC ×5
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Y: 1.0 Vp-p (including sync signal), PB/PR (CB/CR): 0.7 Vp-p, 75 ohms
Y: 1.0 Vp-p, C: 0.286 Vp-p, 75 ohms
D-sub HD 15-pin (female) ×1
R: 0.7 Vp-p, 75 ohms,
G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms,
B: 0.7 Vp-p, 75 ohms
HD, VD/SYNC: TTL, high impedance, positive/negative automatic
NOTE: SYNC/HD and VD terminals do not accept tri-level sync signals.
Y: 1.0 Vp-p (including sync signal), P
B
/P
R
(C
B
/C
R
): 0.7 Vp-p, 75 ohms
BNC ×1, 1.0 Vp-p, 75 ohms
Input: TTL, high impedance. Output: TTL, max. 10 mA
BNC ×1, 1.0 Vp-p, 75 ohms, TTL, max. 10 mA
D-sub 9-pin (female) ×1 for external control (RS-232C compliant)
D-sub 9-pin (male) ×1 for link control
M3 jack ×1 for wired remote control
M3 jack ×1 for link control
REMOTE 2 IN D-sub 9-pin (female) ×1 for external control (parallel)
Optical axis shiftVertical
Horizontal
NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50/90.
NOTE: Optical axis shift function cannot be operated when used with the ET-D75LE50.
±50% (±40% with the ET-D75LE6, +71% with the ET-D75LE90)
from center of screen, powered
±30% (±20% with the ET-D75LE6) from center of screen, powered
DIGITAL LINK/LAN RJ-45 Network connection / digital link connection (video/network/serial
control) compliant with PJLink (class1) ,100base-tx, Art-Net compatible
Deep Color, compatible with HDCP
3G-SDI signal: SMPTE ST 424 compliant
Dual-link 3G-SDI signal: SMPTE ST 425 compliant (Link 1)
Dual-link 3G-SDI signal: SMPTE ST 425 compliant (Link 2)
PT-DS20K2
3-Chip DLP™ Projector
As of August 2015 3/13
SFD15M027