Operation Manual

Setting up
22
- ENGLISH
Getting Started
Screen size and throw distance
When planning the projector and screen geometry, refer to the gures below and the information on the following
pages for reference. After the projector is roughly positioned, picture size and vertical picture positioning can be
nely adjusted with the powered zoom lens and lens shifting mechanism.
L (LW/LT)
Û
Projection distance (m)
SH Height of the projection area (m)
SW Width of the projection area (m)
H
Vertical distance between the lens center level and the
bottom edge of the projected image. (m)
SD Diagonal length of the projection area (")
LW : Minimum distance:
Û
LT : Maximum distance
Attention
Before installing, please read
z
“Precautions with regard to safety” (
Æ
pages 8 to 16)
Special care should be used when DLP projectors are used in the same room as high power laser equipment.
z
Direct or indirect hitting of a laser beam on to the lens can severely damage the Digital Mirror Devices ™ in which case
there is a loss of warranty.
L (LW/LT)
Screen
L (LW/LT)
SW
Screen
H
SH
SW
SD
Projected image
SH