Specification Sheet

S P E C F I L E
PT-DW17K
3-Chip DLP
™
Projector
As of September 2012
SFD12M007-1
9 / 1 6
H
(Width of
projected image)
V
(Height of
projected image)
0.2V
0.7V
0.7V
0.2V
0.3H0.3H
Standard postition of projected image
Shift range
Optical axis shift function allows to shift the position of a projected image as shown below.
•
When the lens except the ET-D75LE6 is mounted
H
(Width of
projected image)
V
(Height of
projected image)
0.2V
0.6V
0.6V
0.2V
0.2H0.2H
Standard postition of projected image
• When the ET-D75LE6 is mounted
• Because the ET-D75LE50 is a fixed short-throw lens, the lens shift function cannot be used with it.
360°
-15°
+15°
Installable angle
Install the projector at an angle within the range shown below.
• Vertical direction
The projector may be installed at a vertical
angle of 360°.
• Horizontal direction
The projector may be installed at a horizontal
angle of ±15°.
+15°
-15°
-15°
+15°
• Vertical direction in portrait mode with the
ET-LAD510P/LAD510PF mounted
The projector may be installed at a vertical
angle of ±15°.
• Horizontal direction in portrait mode with
the ET-LAD510P/LAD510PF mounted
The projector may be installed at a horizontal
angle of ±15°.
NOTE: The projector cannot be vertically installed all by itself. Also, the terminal side must face downward when vertically installed.