Operating Instructions

Technical Information
ENGLISH - 35
Appendix
J Display dots of each model
WSXGA+ 1 680 x 1 050 65.3 60.0 146.3 A
D/R1 920 x 1 080
*10
1 920 x 1 080 66.6 59.9 138.5
AA
*5
WUXGA 1 920 x 1 200 74.0 60.0 154.0
AA
*5
DD
*1. The “i” appearing after the resolution indicates an interlaced signal.
*2. The following symbols are used to indicate picture quality.
AA Maximum picture quality can be obtained.
A Signals are converted by the image processing circuit before picture is projected.
B Some loss of data occurs to make projection easier.
*3. Marked signals are indicated in
*4. The following symbols are used to indicate the format.
V = VIDEO, S = S-VIDEO, D = DVI, R = RGB, Y = YP
BPR
*5. PT-DW6300U/PT-D6000U: A
*6. PT-DZ6710U/PT-DZ6700U/PT-D6000U: A
*7. PT-DZ6710U/PT-DZ6700U/PT-DW6300U: A
*8. PT-DW6300U/PT-D6000U: B
*9. RGB signals only and DVI-D is not compatible.
*10.VESA CVT-RB (Reduced Blanking) compatible.
NOTE:
• Projecting an interlaced signal may cause flicker in screen.
PT-DZ6710U
1 920 x 1 200
PT-DZ6700U
1 920 x 1 200
PT-DW6300U
1 280 x 800
PT-D6000U
1 024 x 768
Mode
Display
resolution
(dots)
*1
Scanning
frequency
Dot clock
frequency
Picture
quality
*2
PnP
*3
Format
*4
H (kHz) V (Hz) (MHz) RGB2
DVI-D
EIDI1
DVI-D
EIDI2