S P E C F I L E The PT-DW6300LS and PT-DW6300LK are not equipped with a lens. P ro d u c t N u m b e r : P ro d u c t N a m e : PT-DW6300S/DW6300K PT-DW6300LS/DW6300LK DLP ™ Projectors As of February 2009. Specifications subject to change without notice.
S P E C F DLP ™ Projectors I L E PT-DW6300S/DW6300K/DW6300LS/DW6300LK Specifications Main Unit Power supply: North America: Europe: North America: 120 V AC, 50/60 Hz 220–240 V AC, 50/60 Hz Power consumption: 780 W (780 VA) (Standby mode eco* 1 : 0.2 W, Standby mode normal: 8 W. Both with fan stopped.) Europe: 750 W (840 VA) (Standby mode eco* 1 : 0.3 W, Standby mode normal: 9 W. Both with fan stopped.) DLP™ chip: Panel size: 0.
S P E C F DLP ™ Projectors I L E PT-DW6300S/DW6300K/DW6300LS/DW6300LK RGB 2 IN: R, G, B: D-sub HD 15-pin x 1 R: 0.7 Vp-p, 75 ohms, G: 0.7 Vp-p (G: 1.0 Vp-p for sync on G), 75 ohms, B: 0.7 Vp-p, 75 ohms HD/VD, SYNC: High impedance, TTL (positive/negative), 75 ohms NOTE: HD/SYNC, and VD terminals do not accept tri-level sync signals. Y: 1.0 Vp-p (including sync signal), PB/PR: 0.7 Vp-p, 75 ohms BNC x 1, 1.0 Vp-p, 75 ohms Mini DIN 4-pin x 1, Y: 1.0 Vp-p, C: 0.
S P E F C I L E PT-DW6300S/DW6300K/DW6300LS/DW6300LK DLP ™ Projectors 423 (16-21/32˝) 9 (11/32˝) 77.5 (3-1/16˝) 20 (25/32˝) 155 (6-3/32˝) 175 (6-7/8˝) 17 (21/32˝) unit : mm (inch) NOTE: This illustration is not drawn to scale. The illustration shows the PT-DW6300S/DW6300K.
E C F I L DLP ™ Projectors E PT-DW6300S/DW6300K/DW6300LS/DW6300LK Standard setting-up position (when installed using the ET-PKD56H) H Upper edge of projected image 416– 496 (16-3/8˝– 19-17/32˝) P *2 340– 420 (13-3/8˝– 16-17/32˝) S L *2 Adjustable in 40 mm (1-9/16˝) steps. *1 Projected image *1 When the lens protrudes to the maximum.
S P E C F I DLP ™ Projectors L E PT-DW6300S/DW6300K/DW6300LS/DW6300LK Projection distance for 16:10 aspect ratio screen Unit: millimeters Screen size (inch, diagonal) Distance to screen (L) Zoom Fixed-focus Zoom lenses Fixedfocus lens* ET-DLE150 Zoom lens Supplied lens ET-DLE250 Zoom lens ET-DLE350 Zoom lens ET-DLE450 Zoom lens min. max. min. max. min. max. min. max. min.
S P E C F I DLP ™ Projectors L E PT-DW6300S/DW6300K/DW6300LS/DW6300LK Projection distance for 16:9 aspect ratio screen Unit: millimeters Screen size (inch, diagonal) Distance to screen (L) Zoom Fixed-focus Zoom lenses Fixedfocus lens* ET-DLE150 Zoom lens Supplied lens ET-DLE250 Zoom lens ET-DLE350 Zoom lens ET-DLE450 Zoom lens min. max. min. max. min. max. min. max. min.
S P E C F DLP ™ Projectors I L E PT-DW6300S/DW6300K/DW6300LS/DW6300LK Calculation of the projection distance For a screen size different from the above, use the equation below to calculate the projection distance. Aspect ratio 16:10 ET-DLE150 minimum maximum L (mm) = (diagonal screen size in inches) x 30.0 - 54.0 L (mm) = (diagonal screen size in inches) x 43.3 - 49.8 Supplied lens minimum maximum L (mm) = (diagonal screen size in inches) x 39.7 - 65.
S P E C F DLP ™ Projectors I L E PT-DW6300S/DW6300K/DW6300LS/DW6300LK Shift range Optical axis shift function allows to shift the position of a projected image as shown below. • Floor mount • Ceiling mount H 0.1H V Standard postition of projected image 0.6V V (Height of projected image) 0.6V 0.1H (Height of projected image) (Width of projected image) Standard postition of projected image 0.1H 0.
S P E C F DLP ™ Projectors I L E PT-DW6300S/DW6300K/DW6300LS/DW6300LK List of compatible signals This projector supports RGB signals with horizontal frequencies of 15 to 91 kHz, vertical frequencies of 50 to 85 Hz and up to 150 MHz dot clock. NOTE: The native resolution of this projector is 1,024 x 800 pixels.
S P E F C DLP ™ Projectors I L E PT-DW6300S/DW6300K/DW6300LS/DW6300LK Serial connector The serial connector complies with RS-232C. To control the projector from a personal computer, commands must be input through communication software, based on the format and satisfying the communication conditions shown below. Pin assignments and signal names No. Signal name Description 1 – NC No.
S P E C F I DLP ™ Projectors L E PT-DW6300S/DW6300K/DW6300LS/DW6300LK Cable specifications Projector 1 PC (DTE) NC NC 2 2 3 3 4 NC NC NC NC 6 7 7 8 8 9 4 5 5 6 1 NC NC 9 Control commands * Command : Parameter Function PON POF IIS:DVI IIS:RG1 IIS:RG2 IIS:VID IIS:SVD LPM:0 LPM:1 LPM:2 LPM:3 OSH:0 OSH:1 OFZ:0 OFZ:1 OAS VPM:NAT VPM:STD VPM:DYN VPM:CIN VPM:GRA VXX:DLVI0=+00000 VXX:DLVI0=+00001 VXX:DLVI0=+00002 VXX:DLVI0=+00003 OTE:1 OTE:2 OTE:4 OTE:10 TSD:y1y2y3y4m1m2d1d2w TS
S P E C F I L E PT-DW6300S/DW6300K/DW6300LS/DW6300LK DLP ™ Projectors Status asking commands Command : Parameter Q PW Function Main power status Q SH Shutter function status Q FZ Freeze function status Q IN Input signal status Q OS On-screen display status Q ST Q $L:1 Q $L:2 Q SL Projector run time Lamp 1 run time Lamp 2 run time Lamp operation mode status Q LP Lamp power mode status Q PM Picture mode status Q VX:DLVI0 System daylight view status Q TM:0 Q TM:1 Q TM:2 Q GD Q GT T
S P E C F I DLP ™ Projectors L E PT-DW6300S/DW6300K/DW6300LS/DW6300LK Notes on Projector Placement and Operation The projector uses a high-wattage lamp that becomes very hot during operation. Please observe the following precautions. 1. Never place objects on top of the projector while it is operating. 2. Make sure there is an unobstructed space of 500 mm or more around the projector’s exhaust openings. 3. Do not stack projector units directly on top of one another.
